冷弯薄壁C和Z型钢组合框架低层住宅的承载能力比较
PDF下载 (816)赵伟欣,李发超,黄栩浩,叶文华,朱 珏.冷弯薄壁C和Z型钢组合框架低层住宅的承载能力比较[J].宁波大学学报(理工版),2019,32(2):85-90.DOI:
ZHAO Wei-xin,LI Fa-chao,HUANG Xu-hao,YE Wen-hua,ZHU Jue.Comparison of load-bearing capacity of low level residential buildings with cold-formed thin-walled C and Z steel composite frames[J].Journal of Ningbo University(Natural Science & Engineering Edition),2019,32(2):85-90.DOI:
| Title: | Comparison of load-bearing capacity of low level residential buildings with cold-formed thin-walled C and Z steel composite frames |
| 作者: | 赵伟欣, 李发超, 黄栩浩, 叶文华, 朱 珏 |
| Author(s): | ZHAO Wei-xin, LI Fa-chao, HUANG Xu-hao, YE Wen-hua, ZHU Jue |
| 关键词: | 冷弯薄壁卷边C和Z型钢构件; 临界屈曲荷载; 极限承载力; 有限元; 低层房屋 |
| Keywords: | cold-formed thin-walled C- and Z- steel sections; critical buckling load; ultimate bearing capacity; finite element; low-level housing |
| 分类号: | TU391 |
| 文献标识码: | A |
| 摘要: | 利用遗传算法和直接强度法(DSM)得到轴压下优化后的冷弯薄壁卷边C和Z型钢, 取相同截面积时两者的最优尺寸相同. 利用有线条(CUFSM)和DSM, 验证了单根冷弯C和Z型钢的临界屈曲荷载和极限承载力基本对应相等. 随后, 基于有限元软件SAP2000对冷弯薄壁型钢单层住宅整体建模, 将优化后尺寸相同的C和Z型钢应用于结构中, 施加相同的荷载, 发现两者整体结构的临界屈曲载荷不同, Z型钢房屋框架屈曲后承载能力更高; 承载薄弱的风向角所对应的Z型钢房屋组合框架屋檐等薄弱区域所承受的轴力较C型钢房屋更小, 因此认为在用钢量相同的前提下, 低层房屋建设选择Z型截面更优. |
| Abstract: | By using genetic algorithm and Direct Strength Method (DSM), the optimized cold-formed thin-walled lipped C and Z steel sections after axial compression are obtained. The same optimal size is obtained when considering the same cross-sectional area. Using the linear (CUFSM) and DSM, the conclusion was verified that the critical buckling load and ultimate bearing capacity of single cold-formed C and Z steel are almost equal. Then, based on the finite element software SAP2000, the overall modeling of cold-formed thin-walled steel single-storey house is conducted. C and Z beams of the same optimized size are utilized in the structure, and the same loads are applied. It is found that the critical buckling loads of the two structures are different, and the bearing capacity of the Z-beam housing frame is higher after buckling. Under the wind direction with weak bearing capacity, the axial force in eaves and other weak areas of the combination frame of Z-shaped steel house is smaller than that of C-shaped steel house. Therefore, it is considered that under the premise of the same amount of steel used in low-rise housing construction, it is better to choose the Z-shaped section. |
| 参考文献 /References: | [1] 中国建筑标准设计研究院. 低层冷弯薄壁型钢房屋建筑技术规程(JGJ227-2011)[M]. 北京: 中国计划出版社, 2011:1-118. [2] 周绪红, 石宇. 低层冷弯薄壁型钢结构住宅体系[J]. 建筑科学与工程学报, 2005, 22(2):1-14. [3] 段君瑛. 冷弯薄壁型钢结构房屋及其在我国的发展应用[J]. 山西建筑, 2008, 7(34):84-85. [4] 赵一捷, 张其林. 冷弯薄壁型钢组合截面构件研究现状[J]. 施工技术, 2013, 8(42):1-8. [5] Schafer B W, Pekiz T. Direct strength prediction of cold-formed steel members using numerical elastic buckling solutions[C]//Second International Conference on Thin-walled Structures. Singapore: Elsevier Science Ltd, 1998:137-144. [6] 张旭, 吴梦景, 黄栩浩, 等. 冷弯薄壁卷边槽钢尺寸优化设计研究[J]. 工业建筑, 2016, 46:293-296. [7] Zhou X H, Liu Z K. An analytical model for analyzing distortional buckling of cold-formed steel section[J]. Thin-walled Structure, 2008, 64:1430-1436. [8] 黄栩浩, 孙国军, 吴梦景, 等. 冷弯薄壁卷边槽钢卷边角度优化设计[J]. 工业建筑, 2015, 45(11):167-171; 180. [9] Sill B L, Cook N J, Fang C. The aylesbury comparative experiment: A final report[J]. Journal of Wind Engineering and Industrial Aerodynamics, 1990, 36(2):1053-1062. [10] Richardson G M, Robertson A P, Hoxey R P, et al. Fullscale and model investigations of pressures on an industrial/agricultural building[J]. Journal of Wind Engineering and Industrial Aerodynamics, 1992, 43(1/2/3):1553-1564. [11] Levitan M L, Mehta K C. Texas tech field experiments for wind loads Part Ι: Building and pressure measuring system[J]. Journal of Wind Engineering and Industrial Aerodynamics, 1992, 43(1/2/3):1565-1576. [12] Levitan M L, Mehta K C. Texas tech field experiments for wind loads Part Π: Meteorological instrumentation and terrain parameters[J]. Journal of Wind Engineering and Industrial Aerodynamics, 1992, 43(1/2/3):1577-1588. [13] 邹晓旭. 空间桁架大型临时看台风荷载分析方法[D]. 哈尔滨: 哈尔滨工业大学, 2014. [14] 李秋胜, 戴益民, 李正农. 低矮房屋风荷载实测研究(Ⅱ)—–双坡屋面风压特征分析[J]. 土木工程学报, 2012, 45(4):1-8. [15] 四川省住房和城乡建设厅. 民用建筑可靠性鉴定标准(GB50292-2015)[M]. 北京: 中国建设出版社, 2015:1-102. |
| 备注/Memo: | 收稿日期: 2018－08－23. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/ 基金项目: 国家自然科学基金（11572162）; 浙江省自然科学基金（LY13A020007）. 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/第一作者: 赵伟欣（1990－）, 女, 浙江宁波人, 在读硕士研究生, 主要研究方向: 钢结构的稳定性. E-mail: zhaoweixin220283@163.com *通信作者: 朱珏（1979－）, 女, 浙江金华人, 教授, 主要研究方向: 钢结构的稳定性. E-mail: zhujue@nbu.edu.cn |
