基于工作电流分析的回转副摩擦状态识别实验研究
PDF下载 (336)姜乃铭,李国富,张玉童.基于工作电流分析的回转副摩擦状态识别实验研究[J].宁波大学学报(理工版),2020,33(4):30-34.DOI:
JIANG Naiming,LI Guofu,ZHANG Yutong.Experiment on friction state identification based on working current analysis[J].Journal of Ningbo University(Natural Science & Engineering Edition),2020,33(4):30-34.DOI:
| Title: | Experiment on friction state identification based on working current analysis |
| 作者: | 姜乃铭, 李国富, 张玉童 |
| Author(s): | JIANG Naiming, LI Guofu, ZHANG Yutong |
| 关键词: | 回转副; 电机电流信号; 粒子群算法; 支持向量机 |
| Keywords: | rotary pair; motor current signal; particle swarm optimization; support vector machine |
| 分类号: | TH133 |
| 文献标识码: | A |
| 摘要: | 回转副摩擦状态的变化对机械设备的运行有着重要影响. 针对回转副摩擦状态的识别问题, 设计了以回转副工作电流为摩擦特征来源的实验方案. 通过采集摩擦过程的回转副驱动电机工作电流信号, 分析实验信号的频域和时频域特征, 建立工作电流的摩擦特征库, 用于训练多分类支持向量机分类器, 并在分类器上完成摩擦状态的识别. 实验结果表明, 经特征提取与降维处理后建立的多分类支持向量机分类器具有近90%的识别正确率, 所提出的实验方案有利于实现远距离信号的采集, 适用实际生产加工. |
| Abstract: | The change of the friction state of the rotary pair has an important influence on the operation of the mechanical equipment. Aiming at the problem of recognizing the friction state of the rotary pair, an experimental scheme is designed with the working current of the rotary pair being taken as the source of friction characteristics. By collecting the working current signal of the rotary pair drive motor in the friction process, the frequency and time-frequency domain characteristics of the experimental signal are analyzed, and the friction feature library of the working current is established to train the multi-class support vector machine classifier, and finally the identification of friction status is completed on such classifier. The experimental results show that the established multi-class support vector machine classifier established after feature extraction and dimensionality reduction has a recognition accuracy of nearly 90%. The proposed experimental scheme is also conducive to the realization of long-distance signal acquisition and is suitable for actual production and processing. |
| 参考文献 /References: | [1] 四川省电力工业局, 四川省电力教育协会. 汽轮机事故分析及事故预防[M]. 北京: 中国电力出版社, 2000. [2] 马晨波, 朱华, 张文谦, 等. 往复条件下织构表面的摩擦学性能研究[J]. 摩擦学学报, 2011, 31(1):50-55. [3] 张志梅, 古乐, 齐毓霖, 等. 纳米级金属粉改善润滑油摩擦性能的研究[J]. 润滑与密封, 2000, 25(2):40; 37. [4] Klaic M, Murat Z, Staroveski T, et al. Tool wear monitoring in rock drilling applications using vibration signals[J]. Wear, 2018, 408/409:222-227. [5] 秦萍, 阎兵, 华春蓉, 等. 基于振动监测的静载荷滑动轴承接触摩擦故障诊断实验研究[J]. 摩擦学学报, 2004, 24(4):364-368. [6] Jeon S, Stepanick C K, Zolfaghari A A, et al. Knife-edge interferometry for cutting tool wear monitoring[J]. Precision Engineering, 2017, 50:354-360. [7] Yahiaoui M, Chabert F, Paris J Y, et al. Friction, acoustic emission, and wear mechanisms of a PEKK polymer[J]. Tribology International, 2019, 132:154-164. [8] 任瑶, 李国富, 应小刚, 等. 基于小波包熵与SVM的导轨摩擦磨损状态识别[J]. 计算机工程, 2016, 42(11):281-284. [9] 王仁德, 李国富, 娄益蓓. 基于工作电流信号的设备摩擦状态监测研究[J]. 宁波大学学报(理工版), 2018, 31(5):36-39. [10] Li F, Pang X Y, Yang Z J. Motor current signal analysis using deep neural networks for planetary gear fault diagnosis[J]. Measurement, 2019, 145:45-54. [11] Patra K, Pal S K, Bhattacharyya K. Artificial neural network based prediction of drill flank wear from motor current signals[J]. Applied Soft Computing, 2007, 7(3):929-935. [12] Zhen D, Alibarbar A, Zhou X, et al. Electrical motor current signal analysis using a dynamic time warping method for fault diagnosis[J]. Journal of Physics: Conference Series, 2013, 34(1):191-202. [13] 耿雷雷, 李国富. 基于电机电流信号的滑动轴承摩擦状态监测研究[J]. 机械制造, 2019, 57(9):72-75; 79. [14] 王仁德, 李国富, 应小刚, 等. 基于电机电流分析法及能量特征向量的摩擦实验[J]. 机械设计与研究, 2016, 32(4):139-141; 144. |
| 备注/Memo: | 收稿日期: 2020－04－21. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/基金项目: 国家自然科学基金（51705263）.第一作者: 姜乃铭（1995－）, 男, 辽宁沈阳人, 在读硕士研究生, 主要研究方向: 信号处理与故障诊断. E-mail: jnm95@outlook.com*通信作者: 李国富（1966－）, 男, 浙江温岭人, 教授, 主要研究方向: 机电测控、制造系统工程. E-mail: liguofu@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
