多台阶涡轮轴三辊斜轧减径量对轧制过程的影响规律研究
PDF下载 (291)徐永铭,孙宝寿,束学道,徐焕磊.多台阶涡轮轴三辊斜轧减径量对轧制过程的影响规律研究[J].宁波大学学报(理工版),2021,34(4):55-60.DOI:
XU Yongming,SUN Baoshou,SHU Xuedao,XU Huanlei.Numerical simulation of multi-step turbine shaft in three-roll screw rolling on its influence by diameter reduction[J].Journal of Ningbo University(Natural Science & Engineering Edition),2021,34(4):55-60.DOI:
| Title: | Numerical simulation of multi-step turbine shaft in three-roll screw rolling on its influence by diameter reduction |
| 作者: | 徐永铭, 孙宝寿, 束学道, 徐焕磊 |
| Author(s): | XU Yongming, SUN Baoshou, SHU Xuedao, XU Huanlei |
| 关键词: | 三辊斜轧; 多台阶涡轮轴; 两道次; 减径量 |
| Keywords: | three-roll screw rolling; multi-step turbine shaft; two-pass; diameter reduction |
| 分类号: | TG335.11 |
| 文献标识码: | A |
| 摘要: | 运用Simufact有限元软件建立了三辊斜轧两道次成形多台阶涡轮轴的仿真模型, 通过数值模拟分析了涡轮轴成形情况, 探究了减径量对轧制过程中轧制力、等效应力-应变以及外圆度误差的影响规律. 结果表明: 随减径量的增大, 轧件第1道次和第2道次的径向载荷、等效应力、等效应变和外圆度误差均呈增大趋势. 综合比较3种方案下的轧件成形情况, 方案2为最佳的道次减径量分配方案, 即第1道次减径6mm, 第2道次各台阶减径量分别为2、9和14mm. |
| Abstract: | The simulation model of multi-step turbine shaft in three-roll screw rolling with two-pass forming was established by using finite element software Simufact. The turbine shaft forming was numerically simulated to explore the influences of the diameter reduction on rolling force, equivalent stress-strain and external roundness error during the rolling process. The results show that with the increase of the diameter reduction, the radial load, equivalent stress, equivalent strain and external roundness error of the first and second pass also increase. The comprehensive comparison of the rolling forming conditions under the three schemes indicates that scheme 2 is the best pass diameter reduction distribution scheme. In this scheme, the diameter reduction in the first pass is 6mm, and those of each step in the second pass are 2mm, 9mm and 14mm respectively. |
| 参考文献 /References: | [1] 崔平亮. 航空发动机低压涡轮轴疲劳寿命计算分析[D]. 成都: 电子科技大学, 2014. [2] 申秀丽, 张辉, 宋满祥, 等. 航空燃气涡轮发动机典型制造工艺[M]. 北京: 北京航空航天大学出版社, 2016. [3] Pater Z, Tomczak J, Bulzak T. Numerical analysis of the skew rolling process for main shafts[J]. Metallurgy, 2015, 54(4):627-630. [4] Pater Z, Bulzak T, Tomczak J. Numerical analysis of a skew rolling process for producing a stepped hollow shaft made of titanium alloy Ti6Al4V[J]. Archives of Metallurgy and Materials, 2016, 61(2):677-682. [5] 王付杰, 双远华, 胡建华, 等. 三辊斜轧穿孔工艺的数值模拟与实验分析[J]. 热加工工艺, 2014, 43(9):95-98; 105. [6] 尹元德, 李修叶, 黄浩, 等. Assel轧机轧制薄壁管壁厚螺旋性不均研究[J]. 钢铁研究学报, 2018, 30(7):542-547. [7] 吴昊, 孔祥伟, 罗平. GH4169合金高温变形过程本构方程[J]. 机械设计与制造, 2020(8):163-167. [8] Key S W, Krieg R D, Bathe K J. On the application of the finite element method to metal forming processes: Part I[J]. Computer Methods in Applied Mechanics & Engineering, 1979, 17/18:597-608. [9] 李立敏, 臧勇, 张占柱, 等. 摩擦状况对铜管行星轧制过程的影响[J]. 塑性工程学报, 2009, 16(1):115-119. [10] 李胜祗, 孙中建, 李连诗. 实心坯二辊斜轧过程三维热-力耦合分析[J]. 北京科技大学学报, 2000, 22(1):52-55. [11] 尹元德, 杨青青, 王纯凯, 等. 薄壁无缝钢管顶管过程拉凹缺陷研究[J]. 钢铁研究学报, 2019, 31(5):460-467. [12] 李淼泉, 王小津, 苏少博, 等. GH4169合金塑性变形行为及加工图[J]. 中国机械工程, 2008(15):1867-1870. [13] 朱德彪, 束学道. 工艺参数对楔横轧GH4169合金轴类件力能参数的影响[J]. 塑性工程学报, 2018, 25(1):52-59. [14] 许畅, 束学道, 朱颖. 高铁空心车轴三辊斜轧成形仿真及分析[J]. 宁波大学学报(理工版), 2018, 31(4):16-19. [15] 徐春国, 任广升. 楔横轧工艺两次轧制时断面缩减率的分配[J]. 塑性工程学报, 1999(4):102-105. [16] 曾健, 徐春国, 任伟伟, 等. 不同端部形状下工艺参数对楔横轧轧件凹心深度的影响[J]. 塑性工程学报, 2017, 24(2):111-117. [17] 陈英, 夏昀, 边翊, 等. 铝合金精密锻件图像测量的方法[J]. 塑性工程学报, 2010, 17(6):77-81. |
| 备注/Memo: | 收稿日期: 2020－06－28. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/ 基金项目: 国家自然科学基金（51975301）; 浙江省自然科学基金（LZ17E050001）; 宁波市“科技创新2025”重大专项（2020Z110）. 第一作者: 徐永铭（1995－）, 男, 江苏南通人, 在读硕士研究生, 主要研究方向: 塑性成形工艺与装备. E-mail: 15162855534@163.com *通信作者: 孙宝寿（1960－）, 男, 江苏泰兴人, 副教授, 主要研究方向: 塑性成形工艺与装备. E-mail: sunbaoshou@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
