再生型车削颤振的动力学建模与稳定性分析
PDF下载 (313)邱辉,李国平*,孙涛.再生型车削颤振的动力学建模与稳定性分析[J].宁波大学学报(理工版),2016,29(3):98-102.DOI:
QIU Hui,LI Guo-ping*,SUN Tao. Dynamics Modeling and Stability Analysis of Regenerative Turning Chatter[J].Journal of Ningbo University(Natural Science & Engineering Edition),2016,29(3):98-102.DOI:
| Title: | Dynamics Modeling and Stability Analysis of Regenerative Turning Chatter |
| 作者: | 邱辉, 李国平*, 孙涛 |
| Author(s): | QIU Hui, LI Guo-ping*, SUN Tao |
| 关键词: | 再生型车削颤振; 动力学模型; 稳定性叶瓣图; 稳定区域 |
| Keywords: | regenerative cutting chatter; dynamic model; stability lobes diagram; region of stability |
| 分类号: | TG519.1 |
| 文献标识码: | A |
| 摘要: | 在分析再生型数控车削颤振产生机理的基础上, 建立了再生型外圆车削颤振系统动力学模型, 推导了稳定性极限切削深度和主轴转速与车削系统相关动力学参数的关系, 通过Matlab软件仿真分析得到极限切削深度和主轴转速的稳定性叶瓣图. 结果表明, 提高机床振动系统的等效刚度、等效阻尼比能增大稳定性叶瓣图的稳定区域, 而提高方向系数、切削刚度系数和切削重叠系数则使稳定性叶瓣图的稳定区域变小; 提高机床振动系统固有频率会使稳定性叶瓣图曲线向右移动, 更难激起车削系统的颤振. |
| Abstract: | On the basis of the analysis of the mechanism of regenerative chatter in the computerized numerical control (CNC) lathing process, a dynamic model is constructed for the ex-circle turning chatter system and two formulas of the stability limit of cutting depth and the spindle speed related turning system of kinetic parameters are deduced. The stability lobes diagram of the cutting depth limit and spindle speed are obtained using the MATLAB software. Results of analysis show that improvement of the equivalent stiffness and equivalent damping ratio of vibration system can increase the stability lobes diagram’s stability region, but improvement of the direction coefficient, cutting stiffness coefficient and cutting overlapping coefficient shall compromise the stability of the stability lobes diagram area. On the other hand, improving the natural frequency of the machine tool vibration system makes stability lobes figure curve move to the right and harder to be activated. These simulation results can provide corresponding theoretical basis to suppress chatter in practical processing. |
| 参考文献 /References: | [1] YU J Y, ZHANG Y L. Study on electro rheological fluid damper for application in machining chatter control[J]. Chinese Journal of Mechanical Engineering, 2003, 16(1): 13-16. [2] TAYLOR F W. On the art of cutting metals[J]. Transactions of ASME, 1907, 10(6):31-33. [3] MORADI H, MOVAHHEDY M R. Robust control strategy for suppression of regenerative chatter in turning [J]. Manufacturing Processes, 2009, 11:55-65. [4] 阳辉, 黄彼调, 方成刚.再生型切削颤振系统极限切削宽度探究[J]. 现代制造工程, 2008(5):110-112. [5] OZLU E, BUDAK E. Analytical modeling of chatter stability in turning and boring operations-part II: Experimental verification[J]. Manufacturing Science and Engineering, 2007, 129:726-732. [6] 赵宏伟, 王晓军, 于骏一. 机床再生型切削颤振系统稳定性极限预测[J]. 西南交通大学学报, 2003, 38(5):547- 552. [7] 丛春晓, 刘恒, 吕凯波, 等. 细长轴切削颤振的稳定性分析和实验研究[J]. 振动与冲击, 2012, 31(5):73-76. [8] 李金华, 谢华龙, 盛忠起, 等. 数控车削过程再生型颤振稳定性建模与仿真[J]. 东北大学学报(自然科学版), 2013, 34(1):118-122. [9] LUCIANO V M, JUAN C J C, JOSE A R. Character- ization of machining chattering dynamics: An R/S scaling analysis approach[J]. International Journal of Machine Tools & Manufacture, 2009, 49:832-842. [10] Grossi N, Scippa A, Sallese L, et al. Spindle speed ramp-up test: A novel experimental approach for chatter stability detection[J]. International Journal of Machine Tools & Manufacture, 2015, 89:221-230. [11] 王晓军. 车削加工系统稳定性极限预测的研究[D].长春: 吉林大学, 2005. [12] ANDREAS O, STEFAN R, MARTIN K, et al. Extension of Tlusty’s law for the identification of chatter stability lobes in multi-dimensional cutting processes[J]. Inter- national Journal of Machine Tools & Manufacture, 2014, 82/83:50-58. |
| 备注/Memo: | 收稿日期: 2015?10?13. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/ 基金项目: 浙江省自然科学基金（LY15E050005）; 浙江省公益性技术应用研究项目（2013C31017）. 第一作者: 邱辉（1990－）, 男, 江西吉安人, 在读硕士研究生, 主要研究方向: 机械振动与机电测控. E-mail: 1064397247@qq.com *通信作者: 李国平（1967－）, 男, 湖北武穴人, 博士/教授, 主要研究方向: 精密加工、机械振动与机电测控. E-mail: liguoping@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
