楔横轧无料头热剪切制坯工艺参数对端部堆料的影响研究
PDF下载 (18763)荣权升 1,王 英 1*,陶德华 1,周 贤 1,束学道 1,杨玲玲 2.楔横轧无料头热剪切制坯工艺参数对端部堆料的影响研究[J].宁波大学学报(理工版),2018,31(4):11-15.DOI:
RONG Quan-sheng 1,WANG Ying 1*,TAO De-hua 1,ZHOU Xian 1,SHU Xue-dao 1,YANG Ling-ling 2.The influence of technological parameters on end stack in hot shear blank forming without stub bar for cross wedge rolling[J].Journal of Ningbo University(Natural Science & Engineering Edition),2018,31(4):11-15.DOI:
| Title: | The influence of technological parameters on end stack in hot shear blank forming without stub bar for cross wedge rolling |
| 作者: | 荣权升 1, 王 英 1*, 陶德华 1, 周 贤 1, 束学道 1, 杨玲玲 2 |
| Author(s): | RONG Quan-sheng 1, WANG Ying 1*, TAO De-hua 1, ZHOU Xian 1, SHU Xue-dao 1, YANG Ling-ling 2 |
| 关键词: | 楔横轧; 无料头; 热剪切制坯; 工艺参数; 正交试验 |
| Keywords: | cross wedge rolling; no stub bar; hot shear blank forming; technological parameters; orthogonal experiment |
| 分类号: | TG335.19 |
| 文献标识码: | A |
| 摘要: | 基于Deform-3D软件建立了楔横轧无料头热剪切制坯的有限元模型, 在分析了热剪切制坯过程中端部堆料产生原因的基础上, 采用正交试验的方法, 分析了棒料剪切温度、剪切摩擦系数和刀具径向进给速度对端部堆料的影响, 结果表明剪切温度和剪切速度对端部堆料的影响显著, 摩擦系数对端部堆料有一定影响, 且端部堆料随着剪切温度、剪切速度和摩擦系数的增加而减小. 进而以端部堆料值最小为目标, 在考虑加工效率、生产成本和设备能耗的情况下, 优选出了一组最佳工艺参数. 该研究结果为完善楔横轧无料头热剪切制坯工艺, 实现无料头楔横轧提供了工程应用依据和技术支持. |
| Abstract: | The finite element model of the end stack in hot shear blank forming without stub bar for cross wedge rolling was established in Deform-3D software. Based on the analysis on the forming mechanism of the end stack in the process of hot shear blank forming, the influences of different cutting temperatures, shear friction coefficients and cutting tool radial feed speeds on end stack were analyzed by the method of orthogonal experiment. The results shows that the cutting temperature and cutting tool radial feed speeds have significant influence on the values of end stack, and the shear friction coefficients has a certain influence on values of end stacking. The values of end stacking decreases with the increase of cutting temperatures, shear friction coefficients and cutting tool radial feed speeds. Taking processing efficiency, production cost and equipment energy consumption into consideration, a set of technological parameters were identified with the objective of producing the least amount of end stack. The research in this paper will provide engineering application and technical support for the integrity of the technology of hot shear blank forming and realization of cross wedge rolling without stub bar. |
| 参考文献 /References: | [1] 束学道, 孙宝寿. 楔横轧理论与成形技术[M]. 北京: 科学出版社, 2014. [2] Pater Z. Theoretical and experimental analysis of cross wedge rolling[J]. International Journal of Machine Tools and Manufacture, 2000, 40(1):49-63. [3] 刘桂华, 任广生, 徐春国. 楔横轧变形过程中内部空心缺陷产生机理的模拟研究[J]. 机械工程学报, 2004, 40(2):151-156. [4] 段万泽. 楔横轧轧件料头损耗规律的研究[D]. 北京: 北京科技大学, 2010. [5] 魏新红, 束学道. 楔横轧轧件端头凹心影响研究[J]. 热加工工艺, 2011, 40(21):61-63. [6] 刘桂华, 蒋智. 无端头凹心楔横轧精确成形机理及工艺研究[C]. 特种轧制学术交流会, 昆明, 2010:71-74. [7] 胡斌, 束学道. 横轧无料头辊剪制坯成形机理研究[J]. 热加工工艺, 2014, 43(13):92-98. [8] 柳传, 束学道, 胡斌. 楔横轧辊剪制坯力的研究[J]. 热加工工艺, 2015, 44(11):128-132. [9] 胡斌, 束学道. 楔横轧无料头辊剪制坯端部质量研究[J]. 宁波大学学报(理工版), 2014, 27(3):103-107. [10] 胡斌. 无料头楔横轧辊剪制坯成形机理及其端部质量研究[D]. 宁波: 宁波大学, 2014. [11] 游红. 45#优质碳素结构钢的热变形行为研究[D]. 重庆: 重庆大学, 2007. [12] 戴钧陶. 金属压力加工的接触摩擦及其摩擦系数的确定[J]. 锻压技术, 1984, 11(5):48-54. [13] Natasha A R, Othman H, Ghani J A, et al. Chip formation and coefficient of friction in turning S45C medium carbon steel[J] International Journal of Mechanical & Mechatronics Engineering, 2014, 14(6):89-92. |
| 备注/Memo: | 收稿日期: 2017－09－10. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/基金项目: 国家自然科学基金（51505239）; 浙江省自然科学基金（LQ15E050003）; 宁波市自然科学基金（2015A610099）.第一作者: 荣权升（1993－）, 男, 湖北荆州人, 在读硕士研究生, 主要研究方向: 塑性成形工艺与装备. E-mail: 497075209@qq.com*通信作者: 王英（1989－）, 女, 河南邓州人, 博士/副教授, 主要研究方向: 机构学与装备. E-mail: wangying5@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
