基于Simio的绕线车间仿真与优化研究
PDF下载 (469)张岳君,郭 甲,应柯杰,雷常发,牛延鑫,林文文.基于Simio的绕线车间仿真与优化研究[J].宁波大学学报(理工版),2018,31(6):44-48.DOI:
ZHANG Yue-jun,GUO Jia,YING Ke-jie,LEI Chang-fa,NIU Yan-xin,LIN Wen-wen.Simio-based simulation and optimization for the rotor winding workshop[J].Journal of Ningbo University(Natural Science & Engineering Edition),2018,31(6):44-48.DOI:
| Title: | Simio-based simulation and optimization for the rotor winding workshop |
| 作者: | 张岳君, 郭 甲, 应柯杰, 雷常发, 牛延鑫, 林文文 |
| Author(s): | ZHANG Yue-jun, GUO Jia, YING Ke-jie, LEI Chang-fa, NIU Yan-xin, LIN Wen-wen |
| 关键词: | 仿真; 车间布局; 设备故障; 作业优化 |
| Keywords: | simulation; layout; machine failure; operation optimization |
| 分类号: | F273 . |
| 文献标识码: | A |
| 摘要: | 绕线车间为一类单阶段的并机生产系统, 员工要完成手工插件和多台设备的上下料作业, 导致其行走距离过长而有效作业时间不足, 降低了设备的利用率和车间的整体产出, 同时绕线设备的产出受随机故障的影响. 为了优化员工的作业结构和提升车间的生产效率, 本文从车间布局、设备、人员、人机匹配及作业等角度提出了5种改进方案, 并用Simio仿真软件对不同方案的改进效果进行了测试. 仿真结果表明, 增加员工的插件数量与半成品/成品的携带量可以显著优化员工的作业时间构成, 提升车间的人均产出5%, 设备平均利用率上升6%, 也就是说, 作业流程优化有助于协调生产系统中的人机匹配关系并提升系统效率. |
| Abstract: | The winding workshop is regarded as a single-stage parallel-machines production system. Workers assemble the components together, and load/unload the product for the machines. The problem is that workers have to walk a long distance between the machines and the operation desks, which restricts the effective working time and further lowers the machine utilization and the output. In order to optimize the operation and improve the production efficiency, five improving approaches from shop layout, facilities, operator, operation, and man- machine ratio for the workshop are proposed and further tested with Simio-based simulation. The simulation indicates that increasing the number of work pieces and the carrying number of WIP/final pieces helps to optimize the structure of working time, which further improves the output by 5% and the average machine utilization by 6%. In general, the proposed improvement approach is helpful to coordinate the man-machine configuration and increase the production efficiency. |
| 参考文献 /References: | [1]. 基于Flexsim的制动器装配线平衡设计与优化[J]. 中国设备工程, 2016(12上):113- 119. [2].龚立雄, 谭国, 黄敏. 基于Flexsim的摩托车涂装生产线仿真与优化研究[J]. 工业工程与管理, 2014, 19(3): 122-126. [3].肖燕, 贾秋红, 周康渠, 等. 某发动机总装线看板生产系统建模与仿真[J]. 计算机集成制造系统. 2012, 18 (10):2175-2182. [4].贾晨辉, 张浩, 陆剑峰. 离散制造系统规划与仿真建模研究[J]. 计算机工程与应用, 2007, 43(3):242-245. [5].潘国强, 冯定忠. 基于Simio仿真的随机型电机装配线优化研究[J]. 工业工程与管理, 2013, 18(2):65-70. [6].Bako B, Bo?ek P. Trends in Simulation and Planning of Manufacturing Companies[J]. Procedia Engineering, 2016, 149:571-575. [7].Korytkowski P, Wisniewski T, Rymaszewski S. Multi- variate simulation analysis of production leveling (heijunka)–a case study[C]. 7th IFAC Conference on Manufacturing Modelling, Management and Control, 2013:1554-1559. [8].Vieira G E, Kück M, Frazzon E, et al. Evaluating the robustness of production schedules using discrete-event simulation[J]. IFAC Papers OnLine, 2017, 50(1):7953- 7958. |
| 备注/Memo: | 收稿日期: 2017?12?31. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/ 基金项目: 浙江省自然科学基金（LQ16G010002）; 宁波市自然科学基金（2017A610141）; 浙江省教育厅一般项目（Y201533530）; 宁波大学 学科项目（H2L1519）; 宁波大学引进人才科研启动基金. 第一作者: 张岳君（1983－）, 男, 浙江宁波人, 博士/讲师, 主要研究方向: 制造系统的集成优化与控制. E-mail: zhangyuejun1@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
