三维云影像骨科临床价值研究
PDF下载 (241)张 勇,张雁儒,陈剑明,李 明,杨云峰.三维云影像骨科临床价值研究[J].宁波大学学报(理工版),2022,35(3):50-56.DOI:
ZHANG Yong,ZHANG Yanru,CHEN Jianming,LI Ming,YANG Yunfeng.Clinical value of 3D cloud imaging in orthopedics[J].Journal of Ningbo University(Natural Science & Engineering Edition),2022,35(3):50-56.DOI:
| Title: | Clinical value of 3D cloud imaging in orthopedics |
| 作者: | 张 勇, 张雁儒, 陈剑明, 李 明, 杨云峰 |
| Author(s): | ZHANG Yong, ZHANG Yanru, CHEN Jianming, LI Ming, YANG Yunfeng |
| 关键词: | 三维云影像; 临床; 回归分析 |
| Keywords: | 3D cloud image; clinical; regression analysis |
| 分类号: | R68 |
| 文献标识码: | A |
| 摘要: | 旨在研究骨科三维云影像对骨折患者和主治医生在围手术期过程中的临床价值. 对150例骨折病例进行研究, 为其中一半患者提供骨科三维云影像; 针对患者对病情及手术方案的认知度、主治医生术前规划的充分程度以及主治医生对于手术结果的满意度三方面, 分别设计相应问题, 通过问卷调查统计结果, 并利用Spearman系数的相关分析和有序多分类Logistic回归分析模型分别研究骨科三维云影像对于患者和主治医生临床价值. 相关分析显示, 不同文化程度、手术复杂度、三维云影像的使用情况和手术方案认知程度的差异有统计学意义(P<0.05), 不同职级、手术复杂度、主治医生对三维云影像术前规划的使用充分程度以及术后结果满意度的差异有统计学意义(P<0.05); Ordinal回归分析显示, 影响患者对病情及手术方案认知度的因素包括患者受教育程度、手术难度以及是否采用三维云影像; 影响主治医生术前规划充分性和手术满意度的因素包括医生的职级、手术难度以及是否采用三维云影像. 结果显示, 三维云影像对于骨折患者认识病变情况及手术方案有明显正向作用, 而且对临床医生制定充分的手术方案有积极意义, 并且可以带来更好的术后满意度. 在有条件情况下, 建议将该技术作为临床医生的常规化工具进行使用. |
| Abstract: | The present study was designed to study the clinical value of 3D orthopedic cloud imaging for fracture patients and attending physicians during perioperative period. A total of 150 fracture cases were studied and 3D orthopedic cloud images were provided for half of them. Corresponding questions were designed for patients’ awareness of their condition and surgical plan, the adequacy of preoperative planning by attending doctors, and the satisfaction of attending doctors for surgical results. Spearman coefficient correlation analysis and Ordinal Logistic regression analysis model were used to examine the clinical value of 3D orthopedic cloud imaging for patients and attending doctors. Correlation analysis showed that the use of 3D cloud images had significant differences in the medical conditions and surgical plan cognition of the patients with different levels of education, surgical complexity (P<0.05). There were significant differences in the adequacy of preoperative planning and satisfaction of postoperative results among attending doctors with different ranks, surgical complexity and use of 3D cloud imaging (P<0.05). Ordinal regression analysis showed that the factors influencing patients’ cognition of the condition and surgical plan included patients’ education level, surgical difficulty and the use of 3D cloud imaging. Factors influencing the adequacy of preoperative planning and surgical satisfaction of attending physicians were the rank of the physician, the difficulty of surgery, and the use of 3D cloud imaging. The use of 3D cloud imaging has a significant positive effect on patients’ understanding of the lesion and surgical plan. The use of 3D cloud imaging significantly influenced the attending clinicians to make adequate surgical plans and better post operative satisfaction. It is concluded that this technique can be used as a routine tool for attending clinicians. |
| 参考文献 /References: | [1] Jiang M, Chen G, Coles-Black J, et al. Three-dimensional printing in orthopaedic preoperative planning improves intraoperative metrics: A systematic review[J]. ANZ Journal of Surgery, 2020, 90(3):243-250. [2] Tejo-Otero A, Buj-Corral I, Fenollosa-Artés F. 3D printing in medicine for preoperative surgical planning: A review[J]. Annals of Biomedical Engineering, 2020, 48 (2):536-555. [3] Squelch A. 3D printing and medical imaging[J]. Journal of Medical Radiation Sciences, 2018, 65(3):171-172. [4] Yoshino M, Nakatomi H, Kin T, et al. Usefulness of high-resolution 3D multifusion medical imaging for preoperative planning in patients with posterior fossa hemangioblastoma[J]. Journal of Neurosurgery, 2017, 127(1):139-147. [5] Ma L F, Fan Z C, Ning G C, et al. 3D Visualization and Augmented Reality for Orthopedics[M]//Advances in Experimental Medicine and Biology. Singapore: Springer Singapore, 2018:193-205. [6] Min Q S, Wang Z F, Liu N. An evaluation of HTML5 and WebGL for medical imaging applications[J]. Journal of Healthcare Engineering, 2018, 2018:1592821. [7] Landau S. A Handbook of Statistical Analyses Using SPSS[M]. New York: Chapman & Hall, 2004:20-23. [8] George D, Mallery P. IBM SPSS Statistics 26 Step by Step[M]. New York: Pearson, 2013. [9] 中华医学会医学工程学分会数字骨科学组. 3D打印骨科模型技术标准专家共识[J]. 中华创伤骨科杂志, 2017, 19(1):61-64. [10] Rogers C, Piggott A Y, Thomson D J, et al. A universal 3D imaging sensor on a silicon photonics platform[J]. Nature, 2021, 590(7845):256-261. [11] Teng X W, Zhou G S, Wu Y X, et al. Three-dimensional reconstruction method of rapeseed plants in the whole growth period using RGB-D camera[J]. Sensors, 2021, 21(14):4628. [12] Dong X, Premaratne I D, Bernstein J L, et al. Three- dimensional-printed external scaffolds mitigate loss of volume and topography in engineered elastic cartilage constructs[J]. Cartilage, 2021, 12:194760352110495. [13] Snijders T, Schl?sser T P C. The effect of postural pelvic dynamics on the three-dimensional orientation of the acetabular cup in THA is patient specific[J]. Clinical Orthopaedics and Related Research, 2020, 479(3):1873- 1875. [14] Lu Q Y, Zhou R T, Gao S C, et al. CT-scan based anatomical study as a guidance for infra-acetabular screw placement[J]. BMC Musculoskeletal Disorders, 2021, 22:576-585. [15] Wu J H, Zhou P Y, Zhang Y T, et al. A new technology using a customized 3D printed fixator to assist fracture reduction and fixation: Technical note[J]. International Journal of Medical Robotics and Computer Assisted Surgery, 2021, 17:e2270. [16] Sun Z Y, Li H, Wang B, et al. A guideline for screw fixation of coracoid process base fracture by 3D simulation[J]. Journal of Orthopaedic Surgery and Research, 2021, 16:58. [17] Won H, Baek S H, Kim C H, et al. Precontoured plate fixation for incomplete atypical diaphyseal fracture of femur using three-dimensional printing rapid prototyping: Two cases reports[J]. Orthopaedic Surgery, 2021, 13(1): 353-359. [18] Kleye I, Sundler A J, Darcy L, et al. Children’s communication of emotional cues and concerns during a preoperative needle procedure[J]. Patient Education and Counseling, 2021, 30:S0738. [19] Jug M, Toma?evi? M, Cimerman M. 3D model-assisted instrumentation of the pediatric spine: A technical note[J]. Journal of Orthopaedic Surgery and Research, 2021, 16:586. [20] Chen Y B, Niu Z H, Jiang W Q, et al. 3D-printed models improve surgical planning for correction of severe postburn ankle contracture with an external fixator[J]. Journal of Zhejiang University: Science B, 2021, 22(10): 866-875. [21] Zhu W Y, Choi W S, Wong M, et al. The learning curve of computer-assisted free flap jaw reconstruction surgery using 3D-printed patient-specific plates: A cumulative sum analysis[J]. Frontiers in Oncology, 2021, 11:737769. |
| 备注/Memo: | 收稿日期:2021-10-27.宁波大学学报（理工版）网址:http://journallg.nbu.edu.cn/ 基金项目:浙江省医药卫生项目（2019PY073,2021PY072）;宁波市公益类科技计划项目（2019C50050,20211JCGY020559）;宁波市鄞州区科技计划项目（20200432）. 第一作者:张勇（1979－）,男,安徽马鞍山人,博士/副主任医师,主要研究方向:创伤骨科.E-mail:40652648@qq.com *通信作者:张雁儒（1970－）,男,河南西华人,教授,主要研究方向:创伤骨科.E-mail:zyr@hpu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
