PBAT/PVA复合材料发泡行为及抗收缩性能研究
PDF下载 (209)赵 春,赵宝艳,张 利.PBAT/PVA复合材料发泡行为及抗收缩性能研究[J].宁波大学学报(理工版),2023,36(3):94-101.DOI:
ZHAO Chun,ZHAO Baoyan,ZHANG Li.Foaming behavior and shrinkage resistance of PBAT/PVA composites[J].Journal of Ningbo University(Natural Science & Engineering Edition),2023,36(3):94-101.DOI:
| Title: | Foaming behavior and shrinkage resistance of PBAT/PVA composites |
| 作者: | 赵 春, 赵宝艳, 张 利 |
| Author(s): | ZHAO Chun, ZHAO Baoyan, ZHANG Li |
| 关键词: | 超临界二氧化碳发泡; 抗收缩性 |
| Keywords: | PBAT; supercritical carbon dioxide foaming; polybutylene adipate-butylene terephthalate (PBAT); shrinkage resistance |
| 分类号: | TQ328.9 |
| 文献标识码: | A |
| 摘要: | 为提高聚己二酸丁二醇酯-对苯二甲酸丁二醇酯(PBAT)发泡材料的抗收缩性, 用热塑性加工的方法制备PBAT/聚乙烯醇(PVA)复合材料, 并采用超临界二氧化碳技术制备发泡材料. 探讨了PVA含量、发泡温度以及压力对泡孔形貌的影响. 流变性能、动态力学分析的结果表明, PVA的加入改善了PBAT熔体的黏弹性, 提高了其熔体强度, 增强了复合材料的发泡能力. 研究结果表明, PVA的加入可提高PBAT的发泡温度, 降低发泡材料的收缩率. 当PVA含量为10%时, 可将发泡温度提高至105℃, 稳定体积膨胀率为15倍, 体积收缩率仅有1.25%; 而此时PBAT的体积膨胀率只有7倍, 体积收缩率却达到了78.83%. |
| Abstract: | To improve the shrinkage resistance of polybutylene adipate-butylene terephthalate (PBAT) foams, PBAT/polyvinyl alcohol (PVA) composites were made by thermoplastic processing and the foams were prepared by supercritical carbon dioxide technology. The effects of PVA content, foaming temperature and pressure on the cell morphology were investigated. The results of rheological properties and dynamic mechanical analysis showed that the addition of PVA improved the viscoelasticity of PBAT melt, increased its melt strength and enhanced the foaming ability of the composites. The results showed that the addition of PVA could improve the foaming temperature of PBAT and reduce the shrinkage of foaming material. When the PVA content is 10%, the foaming temperature can be increased to 105℃, the final volume expansion ratio is 15 times, whereas the volume shrinkage ratio is only 1.25%; while the final volume expansion rate of PBAT is only 7 times, and the volume shrinkage ratio reaches 78.83%. |
| 参考文献 /References: | [1] Song J S, Mi J G, Zhou H F, et al. Chain extension of poly (butylene adipate-co-terephthalate) and its microcellular foaming behaviors[J]. Polymer Degradation and Stability, 2018, 157:143-152. [2] Chauvet M, Sauceau M, Fages J. Extrusion assisted by supercritical CO2: A review on its application to biopolymers[J]. The Journal of Supercritical Fluids, 2017, 120:408-420. [3] Touchaleaume F, Martin-Closas L, Angellier-Coussy H, et al. Performance and environmental impact of biodegradable polymers as agricultural mulching films[J]. Chemosphere, 2016, 144:433-439. [4] Jiao J, Zeng X B, Huang X B. An overview on synthesis, properties and applications of poly(butylene-adipate-co- terephthalate)-PBAT[J]. Advanced Industrial and Engineering Polymer Research, 2020, 3(1):19-26. [5] Ferreira F V, Cividanes L S, Gouveia R F, et al. An overview on properties and applications of poly(butylene adipate-co-terephthalate)-PBAT based composites[J]. Polymer Engineering & Science, 2019, 59(s2):E7-E15. [6] Fukushima K, Rasyida A, Yang M C. Characterization, degradation and biocompatibility of PBAT based nanocomposites[J]. Applied Clay Science, 2013, 80/81: 291-298. [7] Kijchavengkul T, Auras R, Rubino M, et al. Biodegradation and hydrolysis rate of aliphatic aromatic polyester[J]. Polymer Degradation and Stability, 2010, 95(12):2641-2647. [8] Nayak S K. Biodegradable PBAT/starch nanocomposites [J]. Polymer-Plastics Technology and Engineering, 2010, 49(14):1406-1418. [9] Wu N J, Zhang H. Mechanical properties and phase morphology of super-tough PLA/PBAT/EMA-GMA multicomponent blends[J]. Materials Letters, 2017, 192: 17-20. [10] Fukushima K, Wu M H, Bocchini S, et al. PBAT based nanocomposites for medical and industrial applications[J]. Materials Science and Engineering: C, 2012, 32(6):1331- 1351. [11] Peng J, Zhang C M, Mi H Y, et al. Study of solid and microcellular injection-molded poly(butylenes adipate- co-terephthalate)/poly(vinyl alcohol) biodegradable parts [J]. Industrial & Engineering Chemistry Research, 2014, 53(20):8493-8500. [12] Wei X Y, Cui W S, Zheng K J, et al. Bimodal cellular structure evolution in PBAT foams incorporated by carbon nanotubes and graphene nanosheets[J]. Journal of Polymers and the Environment, 2022, 30(7):2785-2799. [13] Tian H L, Wang Z P, Jia S L, et al. Biodegradable foaming material of poly(butylene adipate-co-terephthalate) (PBAT)/poly(propylene carbonate) (PPC)[J]. Chinese Journal of Polymer Science, 2022, 40 (2):208-219. [14] Li Y T, Zhang Z Y, Wang W M, et al. Ultra-fast degradable PBAT/PBS foams of high performance in compression and thermal insulation made from environment-friendly supercritical foaming[J]. The Journal of Supercritical Fluids, 2022, 181:105512. [15] Song J S, Zhou H F, Wang X D, et al. Role of chain extension in the rheological properties, crystallization behaviors, and microcellular foaming performances of poly (butylene adipate-co-terephthalate)[J]. Journal of Applied Polymer Science, 2019, 136(14):47322. [16] Cui Y L, Zhou H Y, Yin D X, et al. An innovative strategy to regulate bimodal cellular structure in chain extended poly(butylene adipate-co-terephthalate) foams[J]. Journal of Vinyl and Additive Technology, 2021, 27(2):319-331. [17] Shi X, Zhang G, Liu Y, et al. Microcellular foaming of polylactide and poly(butylene adipate-co-terphathalate) blends and their CaCO3 reinforced nanocomposites using supercritical carbon dioxide[J]. Polymers for Advanced Technologies, 2016, 27(4):550-560. [18] Kamoun E A, Chen X, Mohy Eldin M S, et al. Crosslinked poly(vinyl alcohol) hydrogels for wound dressing applications: A review of remarkably blended polymers[J]. Arabian Journal of Chemistry, 2015, 8(1):1- 14. [19] Sun J C, Xu J K, He Z L, et al. Role of nano silica in supercritical CO2 foaming of thermoplastic poly(vinyl alcohol) and its effect on cell structure and mechanical properties[J]. European Polymer Journal, 2018, 105:491- 499. [20] Miyazaki T, Takeda Y, Akane S, et al. Role of boric acid for a poly (vinyl alcohol) film as a cross-linking agent: Melting behaviors of the films with boric acid[J]. Polymer, 2010, 51(23):5539-5549. [21] Jia Y B, Bai S B, Park C B, et al. Effect of boric acid on the foaming properties and cell structure of poly(vinyl alcohol) foam prepared by supercritical-CO2 thermoplastic extrusion foaming[J]. Industrial & Engineering Chemistry Research, 2017, 56(23):6655-6663. [22] Knez ?, Marko?i? E, Leitgeb M, et al. Industrial applications of supercritical fluids: A review[J]. Energy, 2014, 77:235-243. [23] Colton J S, Suh N P. Nucleation of microcellular foam: Theory and practice[J]. Polymer Engineering and Science, 1987, 27(7):500-503. [24] Taki K, Kitano D, Ohshima M. Effect of growing crystalline phase on bubble nucleation in poly(L-lactide)/ CO2 batch foaming[J]. Industrial & Engineering Chemistry Research, 2011, 50(6):3247-3252. [25] Leung S N, Wong A, Wang L C, et al. Mechanism of extensional stress-induced cell formation in polymeric foaming processes with the presence of nucleating agents [J]. The Journal of Supercritical Fluids, 2012, 63:187- 198. [26] 黄泓鑫. 原位成纤增强可生物降解型复合材料微孔发泡行为及性能研究[D]. 北京: 北京化工大学, 2021. [27] 田翰林. PBAT基生物可降解共混物及其发泡材料的制备及性能研究[D]. 长春: 长春工业大学, 2022. |
| 备注/Memo: | 收稿日期:2022-12-06.宁波大学学报（理工版）网址:http://journallg.nbu.edu.cn/ 基金项目:国家自然科学基金（51403110）. 第一作者:赵春（1996－）,男,山西大同人,在读硕士研究生,主要研究方向:高分子轻量化.E-mail:zhaochun14159@163.com *通信作者:张利（1979－）,男,浙江温州人,博士/副教授,主要研究方向:高分子轻量化.E-mail:zhangli2@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
