先进增材制造技术在模具行业的应用现状与展望
PDF下载 (493)陈 泷,张纪奎,曹 苗,梅碧舟,齐士杰,谢重阳,邓益民.先进增材制造技术在模具行业的应用现状与展望[J].宁波大学学报(理工版),2023,36(6):1-16.DOI:10.20098/j.cnki.1001-5132.2023.0406
CHEN Long,ZHANG Jikui,CAO Miao,MEI Bizhou,QI Shijie,XIE Chongyang,DENG Yimin.Overview of advanced additive manufacturing technology in die and mold industry[J].Journal of Ningbo University(Natural Science & Engineering Edition),2023,36(6):1-16.DOI:10.20098/j.cnki.1001-5132.2023.0406
| Title: | Overview of advanced additive manufacturing technology in die and mold industry |
| 作者: | 陈 泷, 张纪奎, 曹 苗, 梅碧舟, 齐士杰, 谢重阳, 邓益民 |
| Author(s): | CHEN Long, ZHANG Jikui, CAO Miao, MEI Bizhou, QI Shijie, XIE Chongyang, DENG Yimin |
| 关键词: | 模具; 增材制造; 模具快速原型制造; 高性能制造 |
| Keywords: | die and mold; additive manufacturing; rapid prototyping of molds; high performance manufacturing |
| 分类号: | TG76 |
| DOI: | 10.20098/j.cnki.1001-5132.2023.0406 |
| 文献标识码: | A |
| 摘要: | 模具在现代工业生产中有着重要地位, 而增材制造技术出现和产业化应用为模具行业带来了变革. 本文对目前模具行业应用较多的增材制造技术, 包括喷射粘结成形、选择性激光烧结、选择性激光融化和光固化成形进行了原理简述. 同时, 根据增材制造技术在模具行业的2个典型应用方向(模具快速原型制造和高性能模具零件制造), 分析了增材制造技术在其中的具体应用方法, 并对国内外相关研究成果进行了综述, 总结出增材制造技术在模具行业进行批量化应用所需要解决的关键问题是 如何通过对原材料、工艺和设备的研究来提高增材制造技术相比于传统制造技术的性价比. 最后对增材制造技术在模具行业的未来发展进行了展望. |
| Abstract: | Die and mold play the important role in modern industrial production, and the appearance and industrialization of additive manufacturing technology has brought changes to the die and mold industry. In this paper, the main additive manufacturing technologies applied in die and mold industry, including binder jetting, selective laser sintering, selective laser melting and stereo lithography appearance, are briefly introduced. At the same time, according to two typical application fields of additive manufacturing technology, namely “mold rapid prototyping manufacturing” and “high performance parts manufacturing”, the specific application methods of additive manufacturing technology were analyzed, and the relevant research results at home and abroad were summarized. Finally, the key problem to be solved in the mass application of additive manufacturing technology in die and mold industry is “how to improve the cost performance of additive manufacturing technology compared with traditional manufacturing technology through the study of raw materials, process and equipment”, and the future development of additive manufacturing technology in the mold industry is prospected. |
| 参考文献 /References: | [1] 赵雪榛. 2022年中国模具行业全景速览: 产品出口规模扩大, 行业市场加速扩容[EB/OL]. [2023-02-27]. https://www.chyxx.com/industry/1137362.html. [2] 张亮亮, 周阳, 刘世锋, 等. 模具钢增材制造及其性能的研究进展[J]. 中国冶金, 2022, 32(3):1-8. [3] 卢秉恒, 李涤尘. 增材制造(3D打印)技术发展[J]. 机械制造与自动化, 2013, 42(4):1-4. [4] Abdulhameed O, Al-Ahmari A, Ameen W, et al. Additive manufacturing: Challenges, trends, and applications[EB/ OL]. [2023-02-27]. https://journals.sagepub.com/doi/full/ 10.1177/1687814018822880. [5] 黄树槐, 张祥林, 马黎, 等. 快速原型制造技术的进展[J]. 中国机械工程, 1997, 8(5):8-12. [6] Emanuel M S, John S H, Michael J C, et al. Three- dimensional printing techniques: US05204055A[P]. 1993-04-20. [7] Utela B, Storti D, Anderson R, et al. A review of process development steps for new material systems in three dimensional printing (3DP)[J]. Journal of Manufacturing Processes, 2008, 10(2):96-104. [8] Gilmer D, Han L, Hong E, et al. An in situ crosslinking binder for binder jet additive manufacturing[J]. Additive Manufacturing, 2020, 35:101341. [9] Deckard C R. Method and apparatus for producing parts by selective sintering: US5316580[P]. 1994-05-31. [10] Awad A, Fina F, Goyanes A, et al. 3D printing: Principles and pharmaceutical applications of selective laser sintering[J]. International Journal of Pharmaceutics, 2020, 586:119594. [11] Wikipedia. Selective laser sintering[EB/OL]. [2023-02- 26]. https://en.wikipedia.org/wiki/ Selective_laser_sintering. [12] Griffith M L, Keicher D M, Atwood C L, et al. Free form fabrication of metallic components using laser engineered net shaping (LENS)[EB/OL]. [2023-02-26]. https:// repositories.lib.utexas.edu/handle/2152/69929. [13] 史玉升, 鲁中良, 章文献, 等. 选择性激光熔化快速成形技术与装备[J]. 中国表面工程, 2006, 19(S1):150- 153. [14] Hull C W. Apparatus for production of three-dimensional objects by stereolithography: US4575330[P]. 1986-03-11. [15] 胡可辉, 赵鹏程, 吕志刚. 光固化增材制造技术在熔模铸造中的应用[J]. 铸造, 2021, 70(2):155-159. [16] 靳逸飞, 丁永春, 温家浩. 立体光固化增材制造技术应用现状及展望[J]. 金属加工(热加工), 2023(3):18-23. [17] 樊自田, 杨力, 唐世艳. 增材制造技术在铸造中的应用[J]. 铸造, 2022, 71(1):1-16. [18] 文世峰, 季宪泰, 周燕, 等. 激光选区熔化成形模具钢的发展现状及前景[J]. 激光与光电子学进展, 2018, 55(1):47-57. [19] Mitra S, Rodríguez de Castro A, El Mansori M. On the rapid manufacturing process of functional 3D printed sand molds[J]. Journal of Manufacturing Processes, 2019, 42:202-212. [20] Hawaldar N, Zhang J. A comparative study of fabrication of sand casting mold using additive manufacturing and conventional process[J]. The International Journal of Advanced Manufacturing Technology, 2018, 97(1):1037- 1045. [21] Snelling D A, Williams C B, Druschitz A P. Mechanical and material properties of castings produced via 3D printed molds[J]. Additive Manufacturing, 2019, 27:199- 207. [22] 赵火平. 微喷射粘结快速成形铸造型芯关键技术研究[D]. 武汉: 华中科技大学, 2015. [23] 李慧. 基于增材制造技术的无模铸型工艺优化[D]. 太原: 太原理工大学, 2016. [24] 余洛生, 刘丰, 刘丽敏, 等. 3D打印呋喃树脂砂型收缩性能研究[J]. 铸造, 2022, 71(5):614-618. [25] 李征, 单忠德, 孙启利, 等. 树脂渗透对砂型3D打印成型精度影响机理研究[J]. 铸造技术, 2021, 42(4):247- 251. [26] Upadhyay M, Sivarupan T, El Mansori M. 3D printing for rapid sand casting: A review[J]. Journal of Manufacturing Processes, 2017, 29:211-220. [27] Fan Z, Huang N Y, Li Y, et al. Investigating on casting mold (or core) making with coated sand by the selected laser sintering[J]. China Foundry, 2004, 1(2):122-126. [28] Wen S F, Shen Q W, Wei Q S, et al. Material optimization and post-processing of sand moulds manufactured by the selective laser sintering of binder-coated Al2O3 sands[J]. Journal of Materials Processing Technology, 2015, 225: 93-102. [29] 司晨, 党惊知, 李玉新, 等. 激光3D打印用覆膜砂的制备工艺研究[J]. 热加工工艺, 2018, 47(5):93-95. [30] 梁小文, 王德清, 徐志锋, 等. 选区激光烧结用覆膜锆砂的制备及其SLS成形工艺研究[J]. 铸造, 2017, 66(8): 814-819; 825. [31] Xu Z F, Liang P, Yang W, et al. Effects of laser energy density on forming accuracy and tensile strength of selective laser sintering resin coated sands[J]. China Foundry, 2014, 11(3):151-156. [32] 薄夫祥, 何冰, 蹤雪梅. 覆膜砂选择性激光烧结工艺[J]. 激光与光电子学进展, 2017, 54(9):247-253. [33] 王春风, 沈其文, 庞祖高. SLS快速制造大型复杂四气门六缸柴油发动机蠕墨铸铁缸盖[C]//2010年中国铸造活动周论文集. 杭州, 2010:461-467. [34] 贺斌, 李显达, 胡平, 等. 基于数值模拟和3D打印的热冲压模具随形水道设计制造研究[J]. 机械工程学报, 2016, 52(19):180-188. [35] Tang Y, Fuh J Y H, Loh H T, et al. Direct laser sintering of a silica sand[J]. Materials & Design, 2003, 24(8):623- 629. [36] Kanyo J E, Schaff?ner S, Uwanyuze R S, et al. An overview of ceramic molds for investment casting of nickel superalloys[J]. Journal of the European Ceramic Society, 2020, 40(15):4955-4973. [37] 刘岩松, 李文博, 刘永胜, 等. 3D打印陶瓷铸型研究与应用进展[J]. 材料工程, 2022, 50(7):18-29. [38] 樊振中. 熔模精密铸造在航空航天领域的应用现状与发展趋势[J]. 航空制造技术, 2019, 62(9):38-52. [39] 薛旷华. RP技术在熔模铸造中的应用研究[D]. 无锡: 江南大学, 2007. [40] 冯涛, 孙建民, 宗贵升. 用选择性激光烧结实现快速精密铸造[J]. 中国机械工程, 1997, 8(5):21-23. [41] ?zer G, ?zbay B, ?ter Z ?, et al. Investigation of the surface quality and dimensional accuracy of polymer patterns produced by selective laser sintering (SLS) method for investment casting (IC)[J]. International Journal of Cast Metals Research, 2020, 33(2/3):146-152. [42] Wang D H, Dong A P, Zhu G L, et al. Rapid casting of complex impeller based on 3D printing wax pattern and simulation optimization[J]. The International Journal of Advanced Manufacturing Technology, 2019, 100(9): 2629-2635. [43] Shi Y S, Wang Y, Chen J B, et al. Experimental investigation into the selective laser sintering of high- impact polystyrene[J]. Journal of Applied Polymer Science, 2008, 108(1):535-540. [44] Shi Y, Chen J, Wang Y, et al. Study of the selective laser sintering of polycarbonate and postprocess for parts reinforcement[J]. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2007, 221(1):37-42. [45] Yang J S, Shi Y S, Shen Q W, et al. Selective laser sintering of HIPS and investment casting technology[J]. Journal of Materials Processing Technology, 2009, 209(4): 1901-1908. [46] 杨来侠, 白祥, 徐超, 等. 基于SLS的诱导轮快速熔模铸造工艺研究[J]. 铸造, 2019, 68(10):1121-1126. [47] 姜耀林, 邵中魁. 3D打印在快速熔模精密铸造技术中的应用[J]. 机电工程, 2017, 34(1):48-51. [48] 宗学文, 刘亚雄, 魏罡, 等. 光固化立体造型熔模铸造工艺的研究[J]. 西安交通大学学报, 2007, 41(1):87-90; 95. [49] 宗学文, 刘洁, 徐文博. 基于SLA的复杂零件低压熔模快速铸造工艺[J]. 特种铸造及有色合金, 2019, 39(3): 300-303. [50] 姜耀林, 何朝辉, 邵中魁. 基于ProCAST及3D打印技术的闭式叶轮快速铸造技术研究[J]. 机电工程, 2015, 32(9):1166-1169; 1191. [51] 鲁中良, 周江平, 杨东升, 等. 基于3D打印技术的预研涡轮叶片精铸蜡型快速制造方法[J]. 航空学报, 2015, 36(2):651-660. [52] Griffith M L, Halloran J W. Freeform fabrication of ceramics via stereolithography[J]. Journal of the American Ceramic Society, 2005, 79(10):2601-2608. [53] Zheng W, Wu J M, Chen S, et al. Influence of Al2O3 content on mechanical properties of silica-based ceramic cores prepared by stereolithography[J]. Journal of Advanced Ceramics, 2021, 10(6):1381-1388. [54] Li H, Liu Y S, Li W B, et al. Effect of zirconia content and particle size on the properties of 3D-printed alumina- based ceramic cores[J]. Journal of the American Ceramic Society, 2021, 104(11):6015-6028. [55] 刘国仟, 闫长海, 张可强, 等. 立体光刻增材制造中固含量对Al2O3陶瓷性能的影响[J]. 无机材料学报, 2022, 37(3):353-360. [56] 赵世鑫, 龚雨波, 周起, 等.3D打印陶瓷型芯研究进展[J/OL].[2023-03-17]. https://doi.org/10.14158/j.cnki.1001- 3814.20221152. [57] 曾勇, 张子佳, 孙立君, 等. 3D打印氧化铝陶瓷的气氛脱脂热处理工艺研究[J]. 无机材料学报, 2022, 37(3): 333-337. [58] Li H, Liu Y S, Liu Y S, et al. Influence of debinding holding time on mechanical properties of 3D-printed alumina ceramic cores[J]. Ceramics International, 2021, 47(4):4884-4894. [59] Wu H H, Li D C, Tang Y P, et al. Rapid fabrication of alumina-based ceramic cores for gas turbine blades by stereolithography and gelcasting[J]. Journal of Materials Processing Technology, 2009, 209(18/19):5886-5891. [60] Chen X J, Li D C, Wu H H, et al. Analysis of ceramic shell cracking in stereolithography-based rapid casting of turbine blade[J]. The International Journal of Advanced Manufacturing Technology, 2011, 55(5):447-455. [61] 李涤尘, 鲁中良, 荆慧. 一种空心涡轮叶片一体化陶瓷铸型的型芯型壳定制方法: CN103360079A[P]. 2013- 10-23. [62] Yang Q, Zhu W J, Lu Z L, et al. Rapid fabrication of high-performance CaO-based integral ceramic mould by stereolithography and non-aqueous gelcasting[J]. Materials (Basel, Switzerland), 2019, 12(6):934. [63] Sachs E, Cima M, Cornie J. Three-dimensional printing: Rapid tooling and prototypes directly from a CAD model[J]. CIRP Annals, 1990, 39(1):201-204. [64] Zhao H P, Ye C S, Xiong S H, et al. Fabricating an effective calcium zirconate layer over the calcia grains via binder-jet 3D-printing for improving the properties of calcia ceramic cores[J]. Additive Manufacturing, 2020, 32:101025. [65] Huang S J, Ye C S, Zhao H P, et al. Additive manufacturing of thin alumina ceramic cores using binder-jetting[J]. Additive Manufacturing, 2019, 29: 100802. [66] 杨伟东, 高翔宇, 刘卫胜, 等. 基于微滴喷射的3DP工艺中渗透误差补偿算法[J]. 机械工程学报, 2021, 57(21):269-278. [67] 郑玉惠, 余欢, 徐志锋, 等. 激光选区烧结陶瓷粉末材料的研究进展[J]. 铸造技术, 2009, 30(2):260-264. [68] Zhang J, Zheng W, Wu J M, et al. Effects of particle grading on properties of silica ceramics prepared by selective laser sintering[J]. Ceramics International, 2022, 48(1):1173-1180. [69] Kim E H, Choi H H, Jung Y G. Fabrication of a ceramic core for an impeller blade using a 3D printing technique and inorganic binder[J]. Journal of Manufacturing Processes, 2020, 53:43-47. [70] Shamsaei N, Yadollahi A, Bian L, et al. An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control[J]. Additive Manufacturing, 2015, 8:12-35. [71] Mai D S, Doan T K, Paris H. Wire and arc additive manufacturing of 308L stainless steel components: Optimization of processing parameters and material properties[J]. Engineering Science and Technology: An International Journal, 2021, 24(4):1015-1026. [72] Chao Q, Thomas S, Birbilis N, et al. The effect of post- processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel[J]. Materials Science and Engineering: A, 2021, 821:141611. [73] Wang X, Qin R, Chen B, et al. Multi-scale collaborative optimization of lattice structures using laser additive manufacturing[J]. International Journal of Mechanical Sciences, 2022, 222:107257. [74] Li X, Jia X, Yang Q, et al. Quality analysis in metal additive manufacturing with deep learning[J]. Journal of Intelligent Manufacturing, 2020, 31:2003-2017. [75] Gu D D, Shi X Y, Poprawe R, et al. Material- structure-performance integrated laser-metal additive manufacturing[J]. Science, 2021, 372(6545):eabg1487. [76] Kirchheim A, Katrodiya Y, Zumofen L, et al. Dynamic conformal cooling improves injection molding[J]. The International Journal of Advanced Manufacturing Technology, 2021, 114(1):107-116. [77] 3DScienceValley. 随形冷却流道可以自动生成吗?浅谈创成式设计在其中的应用[EB/OL]. [2023-03-26]. http:// www.3dsciencevalley.com/?p=24989. [78] Marin F, Souza A F, Ahren C H, et al. A new hybrid process combining machining and selective laser melting to manufacture an advanced concept of conformal cooling channels for plastic injection molds[J]. The International Journal of Advanced Manufacturing Technology, 2021, 113:1561-1576. [79] 吴成龙. 基于3D打印的随形冷却水道注塑模设计与制造技术研究[D]. 广州: 华南理工大学, 2015. [80] 伍仕雄, 杨安民. 金属增材制造技术在模具开发中的应用[J]. 模具制造, 2017, 17(3):68-71. [81] Ahn D G. Applications of laser assisted metal rapid tooling process to manufacture of molding & forming tools - State of the art[J]. International Journal of Precision Engineering and Manufacturing, 2011, 12(5): 925-938. [82] 3DScienceValley. 铝合金压铸模具开模时间减少30%! 3D打印冷却水路起关键作用[EB/OL]. [2023-03-26]. http://www.3dsciencevalley.com/?p=21988. [83] 3DScienceValley. SLM金属3D打印技术为模具行业带来新的解决方案[EB/OL]. [2023-03-26]. http://www. 3dsciencevalley.com/?p=19126. [84] 3DScienceValley. 来TCT亚洲展, 全面探索3D打印随形冷却应用[EB/OL]. [2023-03-26]. http://www. 3dsciencevalley.com/?p=22728. [85] 魏青松. [例47]激光选区熔化技术3D打印模具钢工艺及应用[J]. 中国表面工程, 2016, 29(6):F0002. [86] 刘斌, 谭景焕, 吴成龙. 基于3D打印的随形冷却水道注塑模具设计[J]. 工程塑料应用, 2015, 43(10):71-74. [87] 3DScienceValley. 实现复杂的冷却流道, 铂力特3D打印随形冷却模具[EB/OL]. [2023-03-20]. http://www. 3dsciencevalley.com/?p=11195. [88] 3DScienceValley. 东江模具成功案例-嫁接打印在智能手表包装盒生产中的应用[EB/OL]. [2023-03-17]. http://www.3dsciencevalley.com/?p=22405. [89] 3DScienceValley. 钢片还是复杂花纹一体化模具? 3D打印在轮胎模具制造中的两种应用(上篇)[EB/OL]. [2023-03-20]. http://www.3dsciencevalley.com/?p=18053. |
| 备注/Memo: | 收稿日期:2023-04-09.宁波大学学报（理工版）网址:http://journallg.nbu.edu.cn/ 基金项目:宁波市软科学研究项目（2022R028）;宁波市重点研发计划暨“揭榜挂帅”（2022Z014,2022Z015,2022T004）;北仑区关键核心技术攻关项目（2021BLG001）. 第一作者:陈泷（1990－）,男,江苏泰州人,博士,主要研究方向:高端模具增材设计、制造和修复.E-mail:long_chen@buaa.edu.cn *通信作者:曹苗（1988－）,女,陕西西安人,博士,主要研究方向:关键核心件先进成形工艺和装备.E-mail:529265371@qq.com 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
