基于拓扑优化的汽车座椅骨架轻量化设计
PDF下载 (269)葛 孩,李国平,娄军强,熊文军,肖作华.基于拓扑优化的汽车座椅骨架轻量化设计[J].宁波大学学报(理工版),2023,36(6):36-41.DOI:10.20098/j.cnki.1001-5132.2023.0230
GE Hai,LI Guoping,LOU Junqiang,XIONG Wenjun,XIAO Zuohua.Lightweight design of car seat frame based on topology optimization[J].Journal of Ningbo University(Natural Science & Engineering Edition),2023,36(6):36-41.DOI:10.20098/j.cnki.1001-5132.2023.0230
| Title: | Lightweight design of car seat frame based on topology optimization |
| 作者: | 葛 孩, 李国平, 娄军强, 熊文军, 肖作华 |
| Author(s): | GE Hai, LI Guoping, LOU Junqiang, XIONG Wenjun, XIAO Zuohua |
| 关键词: | 前排座椅骨架; 轻量化; 拓扑优化; 有限元分析 |
| Keywords: | the seat frame; lightweight; topology optimization; finite element analysis |
| 分类号: | U463.83+6 |
| DOI: | 10.20098/j.cnki.1001-5132.2023.0230 |
| 文献标识码: | A |
| 摘要: | 座椅是汽车内饰件中质量较重的一部分, 座椅骨架的轻量化设计可以有效地降低座椅整体质量, 提高汽车整体性能. 本文利用CATIA软件对某乘用车前排座椅骨架进行几何建模, 建立座椅骨架的有限元模型, 并基于国家标准GB 15083—2006对座椅骨架模型进行有限元分析. 然后利用相对密度法的拓扑优化模型对座椅骨架进行轻量化设计, 以体积约束下的最小结构柔度为优化目标, 通过ABAQUS软件中的TOSCA模块对座椅骨架进行拓扑优化, 将优化后的座椅骨架结构在ABAQUS中进行静力学分析. 结果显示,在满足座椅结构强度和刚度的情况下, 座椅骨架减轻了, 减重约4%, 实现了座椅轻量化的效果. |
| Abstract: | As a heavier part of the car interior, the lightweight design of the seat frame can effectively reduce the overall weight of the seat and improve the overall performance of the car. Firstly, the geometric modeling of the front seat of a passenger car was carried out by using CATIA software, and the finite element model of the seat was subsequently established. Then, the finite element analysis of the seat model was carried out based on the national standard GB 15083-2019. Taking the minimum structural flexibility under volume constraints as the optimization objective, the lightweight design of the seat frame was implemented by topology optimization model using the relative density method The seat frame topology was optimized through TOSCA module of ABAQUS software and the optimized seat structure statics analysis was further calculated in ABAQUS. Under the condition of sustaining the seat structure strength and stiffness, the seat frame weight is reduced by , which is about 4% in weight reduction, accomplishing the effect of seat lightweight. |
| 参考文献 /References: | [1] 丁美娟. 汽车座椅轻量化研究进展[J]. 汽车零部件, 2022(5):87-90. [2] 高阳. 汽车轻量化技术方案及应用实例[J]. 汽车工程学报, 2018, 8(1):1-9. [3] 王淑芬, 胡文文, 李玉光, 等. 汽车座椅骨架的拓扑优化研究[J]. 机电工程, 2014, 31(9):1149-1153. [4] 张光亚, 龚云云, 程一明, 等. 某微车座椅骨架的轻量化拓扑构型设计[J]. 汽车工程学报, 2018, 8(6):423-430. [5] 白煜, 丁晓红. 基于拓扑优化的复合材料汽车座椅骨架设计[J]. 上海理工大学学报, 2017, 39(1):75-80. [6] 张志飞, 胡桐铜, 范维春, 等. 基于拉拽安全性能的汽车座椅优化设计[J]. 汽车工程, 2021, 43(2):218-225. [7] Oliveira J, Teixeira P, Lobo G, et al. Topology optimization of a car seat frame[J]. Key Engineering Materials, 2013, 554/555/556/557:681-688. [8] 黄政平, 张国杰, 王茜影, 等. 基于OptiStruct汽车后排座椅结构优化研究[C]//2018Altair结构仿真与优化技术暨OptiStruct用户大会论文集. 青岛, 2018:524- 532. [9] 刘博勋. 基于虚拟仿真的汽车座椅安全性与轻量化的优化研究[D]. 重庆: 重庆理工大学, 2018. [10] 孟礼. 某汽车座椅的结构分析与模态优化[D]. 重庆: 重庆大学, 2018. [11] 左孔天. 连续体结构拓扑优化理论与应用研究[D]. 武汉: 华中科技大学, 2004. [12] Belblidia F, Lee J E B, Rechak S, et al. Topology optimization of plate structures using a single-or three-layered artificial material model[J]. Advances in Engineering Software, 2001, 32(2):159-168. [13] 张志飞, 陈仁, 徐中明, 等. 面向多目标的汽车悬架控制臂拓扑优化研究[J]. 机械工程学报, 2017, 53(4):114- 121. [14] GB 15083—2006. 汽车座椅、座椅固定装置及头枕强度要求和试验方法[S]. [15] Wong J, Ryan L, Kim I Y. Design optimization of aircraft landing gear assembly under dynamic loading[J]. Structural and Multidisciplinary Optimization, 2018, 57(3): 1357-1375. |
| 备注/Memo: | 收稿日期:2023-02-17.宁波大学学报（理工版）网址:http://journallg.nbu.edu.cn/ 基金项目:浙江省自然科学基金（LGF21E050002）. 第一作者:葛孩（1998－）,男,河南驻马店人,在读硕士研究生,主要研究方向:汽车座椅被动安全及轻量化.E-mail:2473163242@qq.com *通信作者:李国平（1967－）,男,湖北武穴人,教授,主要研究方向:汽车及零部件结构优化设计.E-mail:liguoping@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
