含弱界面层合梁的压电阻抗分析及参数研究
PDF下载 (388)郑 骥,严 蔚 *,职君静.含弱界面层合梁的压电阻抗分析及参数研究[J].宁波大学学报(理工版),2016,29(2):43-47.DOI:
ZHENG Ji,YAN Wei *,ZHI Jun-jing.Analysis on Electro-mechanical Impedance for a Laminated Beam with Imperfect Interfaces and Parameter Configuration[J].Journal of Ningbo University(Natural Science & Engineering Edition),2016,29(2):43-47.DOI:
| Title: | Analysis on Electro-mechanical Impedance for a Laminated Beam with Imperfect Interfaces and Parameter Configuration |
| 作者: | 郑 骥, 严 蔚 *, 职君静 |
| Author(s): | ZHENG Ji, YAN Wei *, ZHI Jun-jing |
| 关键词: | 三维有限元; 压电阻抗; 层合结构; 弱界面; 损伤识别 |
| Keywords: | three dimensional finite element; EMI; laminated structure; imperfect interface; damage detection |
| 分类号: | TU317 |
| 文献标识码: | A |
| 摘要: | 采用有限元软件ANSYS进行模拟分析, 构建了含弱界面损伤的层合结构压电阻抗(EMI)模型. 分析中选用线弹簧模型对主体结构层间弱界面损伤进行构造, 并与其他学者的解析解以及实验结果进行了对比, 验证了考虑层间滑移或脱粘效应对层合结构进行模拟分析的有效性和准确性. 然后, 基于该模型对含弱界面的微型组合钢梁进行损伤研究. 研究结果表明, 所建立的三维有限元压电阻抗模型能够清晰地检测到损伤的出现和发展. 最后, 讨论了粘结剂等其他参数对该有限元模型的影响. |
| Abstract: | The Electro-mechanical impedance (EMI) model is established by employing the finite element software ANSYS. Firstly, the linear spring law is utilized to describe the interfacial properties between the layers of the host structures. Comparison with the existing experimental and numerical results is made to reinforce the presented analysis, in which both the interfacial debonding and sliding effects are taken into account. Secondly, the proposed model is employed to indentify the interfacial damages for a laminated beam. The results show that the presented method can detect the appearance and development of the interfacial damages. Finally, the effects of various parameters on the EMI model are highlighted, which include the bonding layer between the piezoelectric patches and the host beam. |
| 参考文献 /References: | [1] 杨斌, 章继峰, 周利民. 玻璃纤维—碳纤维混杂增强PCBT复合材料层合板的制备及低速冲击性能[J]. 复合材料学报, 2015, 32(2):435-443. [2] 陈永备, 高靖, 江帆, 等. 复合材料桅杆层合板刚强度分析研究[J]. 船舶工程, 2012, 34(6):7-9; 43. [3] LIN Y, GIGLIOTTI M, LAFARIE-FRENOT M C, et al. Experimental study to assess the effect of carbon nanotube addition on the through-thickness electrical conductivity of CFRP laminates for aircraft applications [J]. Composites Part B (Engineering), 2015, 76:31-37. [4] KAPURIA S, DHANESH N. Three-dimensional extended kantorovich solution for accurate prediction of interlaminar stresses in composite laminated panels with interfacial imperfections[J]. Journal of Engineering Mechanics, 2015, 141(4):401-414. [5] YAN W, CAI J B, CHEN W Q. An electro-mechanical impedance model of a cracked composite beam with adhesively bonded piezoelectric patches[J]. Journal of Sound and Vibration, 2011, 330(2):287-307. [6] PARK G, INMAN D J. Structural health monitoring using piezoelectric impedance measurements[J]. Philosophical Transactions of the Royal Society A (Mathematical, Physical and Engineering Sciences), 2007, 365:373-392. [7] 王炜, 严蔚, 李万春. 基于高频压电阻抗谱的钢框架损伤识别研究[J]. 宁波大学学报(理工版), 2013, 26(2): 78-82. [8] 蔡金标, 陈勇, 严蔚. 基于三维有限元分析的压电阻抗模型及其应用[J]. 浙江大学学报(工学版), 2010, 44(12): 2342-2347. [9] GIURGIUTIU V Z. Embedded self-sensing piezoelectric active sensors for on-line structural identification[J]. Journal of Vibration and Acoustics, 2002, 124:116-125. [10] 王元清, 祝瑞祥, 戴国欣, 等. 工字形截面受弯钢梁负载下焊接加固试验研究[J]. 土木工程学报, 2015, 48(1): 1-10. [11] 李万春, 严蔚, 王骥. 含损伤梁的三维有限元压电阻抗模型及参数研究[J]. 振动与冲击, 2012, 31(12):45-48. |
| 备注/Memo: | 收稿日期: 2015－06－23. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/基金项目: 浙江省自然科学基金（LY12E08005）; 宁波大学重中之重学科项目（zj1216）.第一作者: 郑骥（1991－）, 男, 浙江丽水人, 在读硕士研究生, 主要研究方向: 结构工程. E-mail: 413952152@qq.com*通信作者: 严蔚（1968－）, 男, 浙江宁波人, 博士/教授, 主要研究方向: 结构健康监测. E-mail: yanwei@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
