基于阈值优化迟滞模型的压电微定位平台前馈控制
PDF下载 (350)宋 林,崔玉国 *,万光继,赵余杰,刘尔春,方 凡.基于阈值优化迟滞模型的压电微定位平台前馈控制[J].宁波大学学报(理工版),2017,30(2):39-43.DOI:
SONG Lin,CUI Yu-guo *,WAN Guang-ji,ZHAO Yu-jie,LIU Er-chun,FANG Fan.Feedforward control of a piezoelectric micro-positioning stage based on threshold-optimization hysteresis model[J].Journal of Ningbo University(Natural Science & Engineering Edition),2017,30(2):39-43.DOI:
| Title: | Feedforward control of a piezoelectric micro-positioning stage based on threshold-optimization hysteresis model |
| 作者: | 宋 林, 崔玉国 *, 万光继, 赵余杰, 刘尔春, 方 凡 |
| Author(s): | SONG Lin, CUI Yu-guo *, WAN Guang-ji, ZHAO Yu-jie, LIU Er-chun, FANG Fan |
| 关键词: | 压电微定位平台; 迟滞建模; 阈值优化; 前馈控制 |
| Keywords: | piezoelectric micro-positioning stage; hysteresis modeling; threshold optimization; feedforward control |
| 分类号: | TN304.9 |
| 文献标识码: | A |
| 摘要: | 为减小压电微定位平台的迟滞误差, 设计前馈控制器对其进行控制. 首先, 在所建平台迟滞模型精度达到要求并使各阈值点精度相同的情况下, 对平台迟滞模型的阈值进行优化, 得到满足模型精度要求的最小算子数, 进而建立平台的PI (Prandtl-Ishilinskii)迟滞模型. 接着, 通过对所建迟滞模型求逆, 设计出平台的前馈控制器. 最后, 在所设计的前馈控制作用下, 平台达到5 μm理想阶跃值的响应时间为0.01 s, 稳态误差中线的变化范围为0.40~0.50 μm; 当期望平台输出最大值为17 μm的变幅值三角波位移时, 实测位移相对于理想位移的误差中线变动范围为－1.15~ －0.05 μm, 所设计前馈控制器可有效减小压电微定位平台的迟滞误差. |
| Abstract: | In order to reduce the hysteresis error of the piezoelectric micro-positioning stage, the feedforward controller is designed. Firstly, the threshold of the hysteresis model of the stage is optimized and the minimum number of operators satisfying the model accuracy is obtained, so as to make the established hysteresis model meet the requirements of precision and the accuracy remains the same at each threshold point. Secondly, a PI (Prandtl-Ishilinskii) hysteresis model of the stage is established. Lastly, the feedforward controller of the stage is designed by the inverse calculation of the hysteresis model. Thus, under the feedforward control, the response time of the stage is 0.01 s at an ideal step of 5 μm, and the variation range of the central line of steady state error is 0.40~0.50 μm. Furthermore, when the desired output of the stage is the triangular wave with maximum displacement amplitude of 17 μm, the variation range of the measured displacement is -1.15~-0.05 μm comparing with the error central line of the ideal displacement. The designed feedforward controller can reduce the hysteresis error of piezoelectric micro-positioning stage effectively. |
| 参考文献 /References: | [1] HASSANI V, TJAHJOWIDODO T, DO T N. A survey on hysteresis modeling identification and control[J]. Mechanical Systems and Signal Processing, 2014, 49: 209-233. [2] 陈辉, 谭永红, 周杏鹏, 等. 压电陶瓷执行器的动态模型辨识与控制[J]. 光学精密工程, 2012, 20(1):88-95. [3] WOLF F, SUTOR A, RUPITSCH S J, et al. Modeling and measurement of creep- and rate-dependent hysteresis in ferroelectric actuators[J]. Sensors and Actuators A: Physical, 2011, 172:245-252. [4] 陈远晟. 压电驱动器的迟滞非线性建模与控制[D]. 南京: 南京航空航天大学, 2013. [5] 刘一帆, 章文俊. 压电驱动器建模与控制技术研究[J]. 压电与声光, 2016, 38(3):363-366. [6] ALJANAIDEH O, HABINEZA D, RAKOTONDRABE M, et al. Experimental comparison of rate-dependent hysteresis models in characterizing and compensating hysteresis of piezoelectric tube actuators[J]. Physica B, 2016, 486:64-68. [7] 张桂林, 张承进, 李康, 等. 基于PI迟滞模型的压电驱动器自适应辨识与逆控制[J]. 纳米技术与精密工程, 2013, 11(1):85-89. [8] 吴伊玲, 刘延霞, 张振东, 等. 基于PI迟滞模型的压电陶瓷复合控制算法研究[J]. 压电与声光, 2015, 37(6): 950-956. [9] 胡兵. 压电陶瓷执行器迟滞非线性模型研究[D]. 长春: 吉林大学, 2015. [10] EIELSEN A A, GRAVDAHL J T, PETTERSEN K, et al. Tracking control for a piezoelectric nanopositioner using estimated states and feedforward compensation of hysteresis[J]. Mechatronics, 2010, 10:96-104. [11] 唐强, 吉方, 陈东生, 等. 压电陶瓷执行器的动态迟滞建模与零相差前馈补偿控制[J]. 组合机床与自动化加工技术, 2015(9):95-98. [12] YANG M J, GU G Y, ZHU L M. High-bandwidth tracking control of piezo-actuated nanopositioning stages using closed-loop input shaper[J]. Mechatronics, 2014, 24: 724-733. [13] ILSSAR D, BUCHER I, FLASHNER H. Modeling and closed loop control of near-field acoustically levitated objects[J]. Mechanical Systems and Signal Processing, 2016, 85:367-381. [14] 胡俊峰, 郝亚洲, 徐贵阳, 等. 一种新型微操作平台的精确运动控制[J]. 机械科学与技术, 2016, 35(2):216- 221. [15] KUHNEN K. Modeling, identification and compensation of complex hysteretic nonlinearities: A modified Prandtl- Ishlinskii approach[J]. European Journal of Control, 2003, 9:407-418. |
| 备注/Memo: | 收稿日期: 2016－11－02. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/ 基金项目: 浙江省高等学校中青年学科带头人学术攀登项目（pd2013091）. 第一作者: 宋林（1992－）, 男, 河南扶沟人, 在读硕士研究生, 主要研究方向: 微/纳米定位, E-mail: 2356840931@qq.com *通信作者: 崔玉国（1971－）, 男, 吉林农安人, 教授, 主要研究方向: 微/纳米定位及精密测量. E-mail: cuiyuguo@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
