热滚压成型工艺参数对微流道回复率的影响
PDF下载 (274)程军飞,陈 兴*,张 坤.热滚压成型工艺参数对微流道回复率的影响[J].宁波大学学报(理工版),2018,31(3):33-39.DOI:
CHENG Jun-fei,CHEN Xing*,ZHANG Kun.Effect of rolling embossing process parameters on elastic recovery rate of polymeric micro-channel[J].Journal of Ningbo University(Natural Science & Engineering Edition),2018,31(3):33-39.DOI:
| Title: | Effect of rolling embossing process parameters on elastic recovery rate of polymeric micro-channel |
| 作者: | 程军飞, 陈 兴*, 张 坤 |
| Author(s): | CHENG Jun-fei, CHEN Xing*, ZHANG Kun |
| 关键词: | 滚压成型; 有限元; 分析模型; 弹性回复率 |
| Keywords: | roll-press process; finite element method; analytic model; elastic recovery rate |
| 分类号: | TH145.4+2 |
| 文献标识码: | A |
| 摘要: | 为研究热滚压成型工艺参数对微流道成型弹性回复的影响, 基于Maxwell模型建立了微流道截面弹性回复率与各工艺参数之间函数关系的分析模型, 并利用非线性有限元仿真软件ABAQUS对PMMA、PVC、PC非结晶材料的热成型进行有限元模拟, 系统分析了温度、预压紧量及滚动速度对弹性回复率的影响. 结果显示, 当增加温度和减小预压紧量、滚动速度时, 可以有效地减小微流道截面弹性回复率. |
| Abstract: | To study the effect of hot roll-press process parameters on the forming of micro-channel, the analytic model based on the generalized Maxwell model to describe the relationship between the elastic recovery rate and the process parameters of the micro-channel is established, and the nonlinear finite element simulation software ABAQUS is employed to simulate roll-press forming of micro-channel. The simulated results show that the elastic recovery rate of micro-channel cross-section decreases with both the increase of the temperature and the decrease of the preloading height and the rolling speed. |
| 参考文献 /References: | [1]. 塑性微成形技术研究进展[J]. 中国材料进展, 2016, 35(4):251-260. [2].王喜梅, 张振, 赵志鸿, 等. 2015年我国工程塑料的应用进展[J]. 工程塑料应用, 2016, 44(6):114-121. [3].徐越. 新型微纳米热压印系统及其应用研究[D]. 杭州: 浙江大学, 2016. [4].孙靖尧, 吴大鸣, 刘颖, 等. 聚合物微纳制造技术[J]. 橡胶技术与装备, 2016, 10(42):1-7. [5].Tan H, Gilbertson A, Chou S Y. Roller nanoimprint lithography[J]. Journal of Vacuum Science ＆ Technology, 1998, 16(6):3926-3928. [6].Youn S W, Ogiwara M, Goto H. Prototype development of a roller imprint system and its application to large area polymer replication for a micro-structured optical device [J]. Material Processing Technology, 2008, 202(1):76-85. [7].王晓伟, 刘颖, 吴大鸣, 等. 聚合物微结构滚轮压印成型设备的研制[J]. 塑料, 2011, 40(5):113-115. [8].李志, 王匀, 孙日文, 等. 微挤压成形数值模拟[J]. 农业机械学报, 2008, 39(11):160-163. [9].Liu C, Li J M, Liu J S. Deformation behavior of solid polymer during hot embossing process[J]. Microelectronic Engineering, 2009, 87(2):200-207. [10].Wan L, Zhu N, Li X. Optimization for solid polymer microstructure replication using gas-assisted hot embossing under low pressure[J]. International Journal of Precision Engineering and Manufacturing, 2016, 17(8): 1067-1072. [11].周洋, 吴大鸣. 挤出滚压成型工艺参数对微结构复制率的影响[J]. 塑料, 2012, 41(6):105-108. [12].刘阳. 基于ABAQUS的微结构滚压仿真[J]. 新技术新工艺, 2012, 12:6-8. [13].朱锡雄, 黄旭升. 高聚物PMMA的受力变形行为与黏弹—–塑性本构理论模型[J]. 宁波大学学报(理工版), 1996, 9(3):56-69. [14].何平笙. 高聚物的力学性能[M]. 合肥: 中国科技大学出版社, 2008:20-126. [15].王海雄, 吕永虎, 李积彬. 有机玻璃热压弹性回复实验与建模[J]. 高分子材料科学与工程, 2014, 30(9):97-100. [16].曹宏深, 陈金周, 韩榜, 等. PMMA高弹态热压变形行为[J]. 锻压技术, 2010, 35(6):104-108. [17].Martin C, Ressier L, Peyrade J P. Study of PMMA recoveries on micrometric patterns replicated by nano- imprint lithography[J]. Physica E, 2003, 17(1):523-525. [18].Wang J, Yi P Y, Deng Y J, et al. Recovery behavior of thermoplastic polymers in micro hot embossing process [J]. Journal of Material Processing Technology, 2017, 243:205-216. [19].Deng Y, Yi P, Peng L, et al. Flow behavior of polymers during the roll-to-roll hot embossing process[J]. Journal of Micromechanics and Microengineering, 2015, 25(6):1- 10. [20].徐佩弦. 高聚物流变学及其应用[M]. 北京: 化学工业出版社, 2003:49-78. [21].陈平, 唐传林, 廖明义. 高聚物的结构与性能[M]. 北京: 化学工业出版社, 2013:67-126. [22].Lan S, Lee H J, Lee S H. Experimental and numerical study on the viscoelastic property of polycarbonate near glass transition temperature for micro thermal imprint process[J]. Materials & Design, 2009, 30(9):3879-3884. [23].傅志红, 喻坚, 魏灵娇. 聚碳酸酯的应力松弛试验及数据处理分析[J]. 塑料工业, 2014, 42(6):89-92. [24].Wang J, Yi P Y, Deng Y J, et al. Mechanism of forming defects in roll-to-roll hot embossing of micro-pyramid arrays: Numerical study[J]. Journal of Micromechanism and Microengineering, 2015, 25:1-12. [25].石亦平, 周玉蓉. ABAQUS有限元分析实例详解[M]. 北京: 机械工业出版社, 2006:9-361. |
| 备注/Memo: | 收稿日期: 2017?08?30. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/ 基金项目: 华中科技大学材料成型与模具技术国家重点实验室开放基金（P2016-21）. 第一作者: 程军飞（1989－）, 男, 河南周口人, 在读硕士研究生, 主要研究方向: 微纳米成型技术. E-mail: 137421952@qq.com *通信作者: 陈兴（1963－）, 男, 湖南茶陵人, 博士/副教授, 主要研究方向: 材料成型加工模拟. E-mail: 2509682316@qq.com 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
