Z型Q345冷弯钢构件率相关本构模型下的动态冲击失稳研究
PDF下载 (246)李佰树,李发超,吴梦景,朱 珏.Z型Q345冷弯钢构件率相关本构模型下的动态冲击失稳研究[J].宁波大学学报(理工版),2020,33(6):45-52.DOI:
LI Baishu,LI Fachao,WU Mengjing,ZHU Jue.Dynamic impact instability of Z-shaped Q345 cold-formed steel members under rate-dependent constitutive model[J].Journal of Ningbo University(Natural Science & Engineering Edition),2020,33(6):45-52.DOI:
| Title: | Dynamic impact instability of Z-shaped Q345 cold-formed steel members under rate-dependent constitutive model |
| 作者: | 李佰树, 李发超, 吴梦景, 朱 珏 |
| Author(s): | LI Baishu, LI Fachao, WU Mengjing, ZHU Jue |
| 关键词: | 冷弯钢; 动态冲击; Johnson-Cook模型; 应变率; 有限元仿真 |
| Keywords: | cold-formed steel; dynamic impact; Johnson-Cook model; strain rate; finite element simulation |
| 分类号: | O347.1 |
| 文献标识码: | A |
| 摘要: | 以Z型Q345薄壁冷弯钢构件为研究对象, 首先测试了试验钢在10-4~102s-1应变率内的材料力学属性, 并拟合得到了由Johnson-Cook本构模型表述的材料本构参数, 同时对拉伸断裂的试件断口做了微观形貌分析. 接着, 在落锤装置上对Z型冷弯钢构件做不同速度的轴向冲击试验, 研究构件受到冲击的动态失稳变形情况. 然后, 通过ABAQUS软件建立了可以反映锤头冲击构件过程的仿真模型, 考虑应变率效应和初始缺陷等因素, 分析了构件主要部位端部质点的位移和速度变化情况以及应力波传播效应的影响. 结果表明 薄壁冷弯钢构件受到外部冲击作用会产生动态屈曲, 随着冲击载荷增大, 发展为明显的塑性变形. 应力波的传播效应对动态屈曲模态的阶跃起着关键的作用. |
| Abstract: | Z-shaped Q345 cold-formed steel members were chosen as the research object. Firstly, the mechanical constitutive properties of the experimental steel in the range of strain rates 10-4~10-2s-1 were obtained, and the material parameters expressed by the Johnson-Cook constitutive model were also obtained by fitting. At the same time, the micro-morphology of the fracture of the tensile specimens was analyzed. Then, the axial impact tests of the Z-shaped cold-formed steel members at different speeds of drop hammer were carried out to study the dynamic instability and deformation of the members under impact. Next, the finite element models that can reflect the impact processes of the drop hammer tests were established by ABAQUS software, whereby the factors such as strain rate effects and initial defects were taken into account. The displacement and velocity changes of the particles at the end of the main part of the component and the influence of the stress wave propagation effect were analyzed. The results showed that dynamic buckling occurred in the thin-walled cold-formed steel members when subjected to external impact, and obvious plastic deformation developed with the increase of the impact loads. The propagation effect of stress waves played a key role in the phase step of dynamic buckling models. |
| 参考文献 /References: | [1] Lau S C W, Hancock G J. Distortional buckling formulas for channel columns[J]. Journal of Structural Engineering, 1987, 113(5):1063-1078. [2] 王礼立, 胡时胜, 杨黎明, 等. 材料动力学[M]. 合肥: 中国科学技术大学出版社, 2017. [3] Hutchinson J W, Budiansky B. Dynamic buckling estimates[J]. AIAA Journal, 1966, 4(3):525-530. [4] Kubiak T. Criteria of dynamic buckling estimation of thin-walled structures[J]. Thin-Walled Structures, 2007, 45(10/11):888-892. [5] Vaughn D G, Canning J M, J W. Coupled plastic wave propagation and column buckling[J]. Journal of Applied Mechanics, 2005, 72(1):139-146. [6] Zhang D N, Shangguan Q Q, Xie C J, et al. A modified Johnson-Cook model of dynamic tensile behaviors for 7075-T6 aluminum alloy[J]. Journal of Alloys and Compounds, 2015, 619:186-194. [7] Xiao B, Xu L, Zhao L, et al. Tensile mechanical properties, constitutive equations, and fracture mechanisms of a novel 9% chromium tempered martensitic steel at elevated temperatures[J]. Materials Science and Engineering: A, 2017, 690:104-119. [8] GB/T228-2002. 金属材料-室温拉伸实验方法[S]. [9] Sun M, Packer J A. High strain rate behaviour of cold-formed rectangular hollow sections[J]. Engineering Structures, 2014, 62/63:181-192. [10] 于文静, 史健勇, 赵金城. Q345钢材动态力学性能研究[J]. 建筑结构, 2011, 41(3):28-30. [11] 徐梅. 高屈服强度TWIP钢动态变形及其构件压溃吸能行为的研究[D]. 北京: 北京科技大学, 2018. [12] 李红英. 金属拉伸试样的断口分析[J]. 山西大同大学学报(自然科学版), 2011, 27(1):76-79. [13] 黄西成, 胡文军. Johnson-Cook本构参数的确定方法[C]. 第六届全国爆炸力学实验技术学术会议论文集, 长沙, 2010:313-320. [14] 林莉, 支旭东, 范锋, 等. Q235B钢Johnson-Cook模型参数的确定[J]. 振动与冲击, 2014, 33(9):153-158; 172. [15] 张旭. 轴向冲击下C型冷弯薄壁钢构件的屈曲失稳研究[D]. 宁波: 宁波大学, 2017. [16] 张旭, 孙国军, 黄栩浩, 等. 轴向冲击下C型冷弯卷边槽钢构件的动力响应[J]. 爆炸与冲击, 2018, 38(4):841- 846. [17] Wang A W, Tian W Y. Characteristic-value analysis for plastic dynamic buckling of columns under elastoplastic compression waves[J]. International Journal of Non- Linear Mechanics, 2003, 38(5):615-628. [18] 王礼立. 应力波基础[M]. 2版. 北京: 国防工业出版社, 2005. |
| 备注/Memo: | 收稿日期:2020-04-01.宁波大学学报（理工版）网址:http://journallg.nbu.edu.cn/ 基金项目:国家自然科学基金（11972203,11572162）;浙江省自然科学基金（LY13A020007）. 第一作者:李佰树（1991－）,男,安徽宿州人,在读硕士研究生,主要研究方向:冷弯钢冲击.E-mail:teamoy@163.com *通信作者:朱珏（1979－）,女,浙江金华人,博士/教授,主要研究方向:冷弯钢结构.E-mail:zhujue@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
