橡胶材料摩擦学理论及试验研究进展
PDF下载 (489)黄海波,沈明学.橡胶材料摩擦学理论及试验研究进展[J].宁波大学学报(理工版),2021,34(6):1-8.DOI:
HUANG Haibo,SHEN Mingxue.Review of theoretical and experimental progress on tribology of the rubber materials[J].Journal of Ningbo University(Natural Science & Engineering Edition),2021,34(6):1-8.DOI:
| Title: | Review of theoretical and experimental progress on tribology of the rubber materials |
| 作者: | 黄海波, 沈明学 |
| Author(s): | HUANG Haibo, SHEN Mingxue |
| 关键词: | 橡胶聚合物; 改性; 改形; 磨粒磨损 |
| Keywords: | rubber polymer; nature-alteration of materials; surface-alteration by superficial texture; abrasive wear |
| 分类号: | TH117.1 |
| 文献标识码: | A |
| 摘要: | 橡胶高分子聚合物因其良好的物化和力学特性而被广泛应用于工业领域. 本文首先综述了橡塑摩擦学的主要理论研究成果, 随后从改性、改形、磨粒磨损以及研究方法等方面介绍了近5年来橡塑试验摩擦学的一些研究进展, 最后对橡塑摩擦学可能聚焦的未来发展方向进行了展望. |
| Abstract: | Rubber materials were widely used in industry due to its good chem-physical and mechanical features. The theoretical research achievements were first summarized on rubber tribology. Then, the research progress was introduced from view of nature-alteration of materials, surface-alteration by superficial texture, abrasive wear and the relevant research methods in recent five years. The potential research directions were also suggested for future development of better rubber materials. |
| 参考文献 /References: | [1] Xuan L, Zhao J, Rui Y, et al. Effect of lubricating oil on thermal aging of nitrile rubber[J]. Polymer Degradation and Stability, 2018, 151:136-143. [2] Major Z. Morphology, mechanical, cross-linking, thermal, and tribological properties of nitrile and hydrogenated nitrile rubber/multi-walled carbon nanotubes composites prepared by melt compounding: The effect of acrylonitrile content and hydrogenation[J]. Applied Surface Science, 2010, 257(2):565-573. [3] Degrange J M, Thomine M, Kapsa P, et al. Influence of viscoelasticity on the tribological behaviour of carbon black filled nitrile rubber (NBR) for lip seal application[J]. Wear, 2005, 259(1):684-692. [4] Schallamach A. Friction and abrasion of rubber[J]. Wear, 1958, 1(5):384-417. [5] Grosch K A. The relation between the friction and visco- elastic properties of rubber[J]. Proceedings of the Royal Society of London, 1963, 274(1356):21-39. [6] Ludema K C, Tabor D. The friction and visco-elastic properties of polymeric solids[J]. Wear, 1966, 9(5):329- 348. [7] D F. The Friction and Lubrication of Elastomers [M]. : Pergamon Press, 1972. [8] Williams M L, Landel R F, Ferry J D. The temperature dependence of relaxation mechanism in amorphous polymers and other glass forming liquid[J]. Journal of the American Chemical Society, 1955, 77(14):3701-3707. [9] Bartenev G M, El’kin A I. Friction properties of high elastic materials[J]. Wear, 1965, 8(1):8-21. [10] Edil T B, Bosscher P J. Engineering properties of tire chips and soil mixtures[J]. Geotechnical Testing Journal, 1994, 17(4):453-464. [11] Fukahori Y, Gabriel P, Liang H, et al. A new generalized philosophy and theory for rubber friction and wear[J]. Wear, 2019, 446/447:203166. [12] 龚乾江, 徐祥, 杨明, 等. CPR/NR和高性能填料对复合摩擦材料力学性能的影响[J]. 材料导报B: 研究篇, 2018, 32(5):1628-1644. [13] 曹源. UHMWPE改性水润滑橡胶轴承材料的制备及摩擦磨损性能研究[D]. 武汉: 武汉理工大学, 2020. [14] 秦红玲, 周新聪, 志敏, 等. Rubber/UHMWPE复合尾轴承材料及其性能分析[J]. 兵器材料科学与工程, 2014, 37(3):23-27. [15] Yan Z, Zhou X, Qin H, et al. Study on tribological and vibration performance of a new UHMWPE/graphite/NBR water lubricated bearing material[J]. Wear, 2015, 332/333: 872-878. [16] 裴高林, 王珊, 苏正涛, 等. 丙烯腈含量对水润滑丁腈橡胶摩擦性能的影响初探[J]. 弹性体, 2020, 30(3):35- 40. [17] 贾其苏, 滑婕, 周杨京, 等. 不同粒径氧化锌填充丁腈橡胶的摩擦磨损机制[J]. 合成橡胶工业, 2020, 43(2): 100-106. [18] 张钊, 戴陈兵, 卢咏来. 植活式纳米氧化锌在天然橡胶中的应用研究[J]. 橡胶工业, 2017, 64(4):213-218. [19] 王军, 周新聪, 周潇然, 等. 二硫化钼改性水润滑尾轴承摩擦磨损性能研究[J]. 润滑与密封, 2018, 43(4):42- 52. [20] 魏刚, 魏莉岚, 谢强, 等. GF/MoS2改性PTFE密封唇片材料的力学及摩擦学性能[J]. 西华大学学报(自然科学版), 2020, 38(3):22-28. [21] 谢奥林, 尹彩流, 王秀飞, 等. 改性玄武岩纤维增强橡胶基摩擦材料的摩擦学性能[J]. 润滑与密封, 2020, 45 (8):101-106. [22] Li R, Ren D, Wang X, et al. Tunable friction performance of magneto-rheological elastomer induced by external magnetic field[J]. Journal of Intelligent Material Systems and Structures, 2018, 29(2):160-170. [23] 王超, 周新聪, 况福明, 等. 不同维度碳纳米材料对水润滑橡胶轴承摩擦磨损性能的影响[J]. 润滑与密封, 2020, 45(2):35-39. [24] 贾承. MWNT补强水润滑橡胶轴承材料的制备及摩擦磨损性能研究[D]. 武汉: 武汉理工大学, 2020. [25] 胡文博, 杜爱华. NBR/SiC复合材料摩擦磨损性能的研究[J]. 特种橡胶制品, 2021, 42(2):16-22. [26] 贾承, 周新聪, 王超, 等. 丁腈橡胶/碳纳米管复合轴承材料摩擦磨损性能研究[J]. 中国修船, 2019, 32(5): 37-41. [27] 张兆想. 等离子体处理改性丁腈橡胶表面及其摩擦学性能研究[D]. 杭州: 浙江工业大学, 2018. [28] 韩珩, 王照洲, 陈肖飞. 丁腈橡胶表面氟化改性及其摩擦学性能研究[J]. 沈阳理工大学学报, 2020, 39(6):69- 87. [29] 王立辉, 韩智斌, 张秀丽, 等. 激光加工微织构对丁腈橡胶水润滑性能的影响研究[J]. 机械制造, 2020, 53(11): 94-97. [30] 卢小东. 沟槽结构阻尼件对滑动摩擦系统动态行为的研究[D]. 成都: 西南交通大学, 2019. [31] 李雪飞. 表面改性对水润滑轴承摩擦性能影响的研究[D]. 宜昌: 三峡大学, 2020. [32] Zhang Q, Mo J L, Lu X D, et al. Grooved-structure design for improved component damping ability[J]. Tribology International, 2018, 123:50-60. [33] 孙亚彬. 表面织构化旋转油封密封性能与摩擦特性研究[D]. 杭州: 浙江工业大学, 2019. [34] Holmberg K, Kivikyt?-Reponen P, H?rkisaari P, et al. Global energy consumption due to friction and wear in the mining industry[J]. Tribology International, 2017, 115: 116-139. [35] Karl-Heinz Z G. Microstructure and wear of materials[J]. Tribology, 1987, 10:554-560. [36] Zhang S W. Wet abrasion of polymers[J]. Wear, 1992, 158:1-13. [37] Zhang S W. Advances in studies on rubber abrasion[J]. Tribology International, 1989, 22:143-148. [38] Trezona R I, Hutchings I M. Three-body abrasive wear testing of soft materials[J]. Wear, 1999, 233/235:209-221. [39] 吕晓仁, 陈骥驰, 王世杰, 等. 丁腈橡胶三体湿磨粒磨损中砂粒运动的有限元分析[J]. 润滑与密封, 2016, 41 (9):44-48; 68. [40] Pellegrin D, A A, Haran E. Wear mechanisms and scale effects in two-body abrasion[J]. Wear, 2009, 266:13-20. [41] Coronado J J. Abrasive size effect on friction coefficient of AISI 1045 steel and 6061-T6 aluminium alloy in two- body abrasive wear[J]. Tribology Letters, 2015, 60:40. [42] Shen M X, Dong F, Zhang Z X, et al. Effect of abrasive size on friction and wear characteristics of nitrile butadiene rubber (NBR) in two-body abrasion[J]. Tribology International, 2016, 103:1-11. [43] Stachowiak G B, Stachowiak G W, Brandt J M. Ball- cratering abrasion tests with large abrasive particles[J]. Tribology International, 2006, 39:1-11. [44] Shen M X, Li B, Zhang Z N, et al. Abrasive wear behavior of PTFE for seal applications under abrasive- atmosphere sliding condition[J]. Friction, 2020, 8(4):755- 767. [45] Petrica M, Katsich C, Badisch E, et al. Study of abrasive wear phenomena in dry and slurry 3-body conditions[J]. Tribology International, 2013, 64:196-203. [46] Pandiyan V, Tjahjowidodo T. Use of acoustic emissions to detect change in contact mechanisms caused by tool wear in abrasive belt grinding process[J]. Wear, 2019, 436/437:203047. [47] Harish A B, Wriggers P. Modeling of two-body abrasive wear of filled elastomers as a contact-induced fracture process[J]. Tribology International, 2019, 138:16-31. [48] Mills R, Dwyer-Joyce R S, Loo-Morrey M. The mechanisms of pedestrian slip on flooring contaminated with solid particles[J]. Tribology International, 2009, 42:403-412. [49] Persson B, Tartaglino U, Albohr O, et al. Rubber friction on wet and dry road surfaces: the sealing effect[J]. Physical review B, 2005, 3:71. [50] Peng Y, Xu Y, Geng J, et al. Tribological assessment of coated piston ring-cylinder liner contacts under bio-oil lubricated conditions[J]. Tribology International, 2016, 107:283-293. [51] Heshmat H. Wear reduction systems for coal-fueled diesel engines I. The basics of powder lubrication[J]. Wear, 1993, 162/164:508-517. [52] Hichri Y, Cerezo V, Do M T. Effect of dry deposited particles on the tire/road friction[J]. Wear, 2017, 376/377: 1437-1449. [53] Dong C L, Yuan C Q, Bai X Q, et al. Study on wear behaviours for NBR/stainless steel under sand water- lubricated conditions[J]. Wear, 2015, 332/333:1012-1020. [54] Yang L, Wang D, Guo Y, et al. Tribological behaviors of quartz sand particles for hydraulic fracturing[J]. Tribology International, 2016, 102:485-496. [55] Do M T, Cerezo V, Zahouani H. Laboratory test to evaluate the effects of contaminant on road skid resistance [J]. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 2014, 228:1994- 1996. [56] Mofidi M, Prakash B. Two body abrasive wear and frictional characteristics of sealing elastomers under unidirectional lubricated sliding conditions[J]. Tribology: Materials Surfaces & Interfaces, 2010, 4:26-37. [57] Zhang H, Liu S, Xiao H. Tribological properties of sliding quartz sand particle and shale rock contact under water and guar gum aqueous solution in hydraulic fracturing[J]. Tribology International, 2019, 129:416-426. [58] Shen M X, Li B, Li S, et al. Effect of particle concentration on the tribological properties of NBR sealing pairs under contaminated water lubrication conditions[J]. Wear, 2020, 456/457:203381. [59] Sun H. COMPASS: An ab initio force-field optimized for condensed-phase applications - overview with details on alkane and benzene compounds[J]. Journal of Physical Chemistry B, 1998, 102:7338-7364. [60] Pan D, Fan B, Qi X, et al. Investigation of PTFE tribological properties using molecular dynamics simulation[J]. Tribology Letters, 2019, 67:28. [61] Osei-Agyemang E, Berkebile S, Martini A. Decomposition mechanisms of anti-wear lubricant additive tricresyl phosphate on iron surfaces using DFT and atomistic thermodynamic studies[J]. Tribology Letters, 2018, 66:48. [62] Duan C, Yang Z, Zhang D, et al. Effect of isomerism on mechanical and tribological properties of thermoplastic polyimide films[J]. Tribology International, 2018, 121: 373-380. [63] Jin Y, Duan H, Cheng B, et al. Synthesis of a multi- phenol antioxidant and its compatibility with alkyl diphenylamine and ZDDP in ester oil[J]. Tribology Letters, 2019, 67:58. [64] Song J, Lei H, Zhao G. Improved mechanical and tribological properties of polytetrafuoroethylene reinforced by carbon nanotubes: A molecular dynamics study[J]. Computational Materials Science, 2019, 168:131-136. [65] Luo Y L, Wu Y P, Luo K Q, et al. Structures and properties of alkanethiol-modifed graphene oxide/solution- polymerized styrene butadiene rubber composites: Click chemistry and molecular dynamics simulation[J]. Composites Science and Technology, 2018, 161:32-38. [66] Li Y, Wang S, Wang Q. A molecular dynamics simulation study on enhancement of mechanical and tribological properties of polymer composites by introduction of graphene[J]. Carbon, 2017, 111:538-545. [67] Li Y, Wang S, Wang Q, et al. Molecular dynamics simulations of tribology properties of NBR (Nitrile- Butadiene Rubber)/carbon nanotube composites[J]. Composites Part B: Engineering, 2016, 97:62-67. [68] 阙刚, 彭旭东, 沈明学, 等. 丁腈橡胶热空气老化力学性能分析及贮存寿命预测[J]. 润滑与密封, 2018, 43(2): 18-25. [69] 强力, 张斌, 于元烈, 等. 橡胶表面碳基薄膜耐磨改性研究进展[J]. 中国表面工程, 2021, 34(2):25-34. [70] Chang , Huang H, R, al.Experimental investigation on the characteristics of tire wear particles under different non-vehicle operating parameters[J]. Tribology International, 2020, 150:106354. [71] 焦润楠, 黄海波, 李锦棒, 等. 不同工况下软质丁苯橡胶轮表面磨损颗粒的产生量及磨损机理[J]. 机械工程材料, 2021, 45(3):11-15. [72] Zhang T, Huang H, Li W, et al. Vulcanization modeling and mechanism for improved tribological performance of styrene-butadiene rubber at the atomic scale[J]. Tribology Letters, 2020, 68:83. [73] 潘路奇, 黄海波, 张涛, 等. CNT复合硫化丁苯橡胶摩擦特性分子动力学模拟[J]. 兵器材料科学与工程, 2020, 43(4):1-6. |
| 备注/Memo: | 收稿日期:2021-09-27.宁波大学学报（理工版）网址:http://journallg.nbu.edu.cn/ 基金项目:国家自然科学基金（51975300）. 第一作者:黄海波（1978－）,男,山东临沂人,教授,主要研究方向:橡塑摩擦学.E-mail:huanghaibo@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
