35m/800t非对称整孔箱梁分幅架设试验研究
PDF下载 (368)蔡煜梁,吕忠达,赵 卓,张军豪,杨黎明.35m/800t非对称整孔箱梁分幅架设试验研究[J].宁波大学学报(理工版),2019,32(3):67-73.DOI:
CAI Yu-liang,L? Zhong-da*,ZHAO Zhuo,ZHANG Jun-hao,YANG Li-ming.Experimental study on erection of 35m/800t asymmetric whole span box girder[J].Journal of Ningbo University(Natural Science & Engineering Edition),2019,32(3):67-73.DOI:
| Title: | Experimental study on erection of 35m/800t asymmetric whole span box girder |
| 作者: | 蔡煜梁, 吕忠达, 赵 卓, 张军豪, 杨黎明 |
| Author(s): | CAI Yu-liang, L? Zhong-da*, ZHAO Zhuo, ZHANG Jun-hao, YANG Li-ming |
| 关键词: | 非对称; 大吨位; 预制箱梁; 架设试验; 有限元计算 |
| Keywords: | asymmetric; large tonnage; precast box girder; erection test; finite element calculation |
| 分类号: | U445.46 |
| 文献标识码: | A |
| 摘要: | 宁波某高速公路工程项目采用“单车跨双幅梁上运梁, 架桥机左右分幅架设35m/800t非对称整孔箱梁”技术方案. 鉴于该技术方案为国内外首次采用, 特开展架设施工过程中承压箱梁受力状态的试验测试和数值模拟分析. 研究结果表明: 架设施工过程中, 最不利工况为运梁车运梁到位工况; 最不利位置出现在跨中截面短翼缘侧底腹板交界处; 且承压箱梁底板短翼缘侧纵向拉应力变化普遍大于长翼缘侧, 存在一定的偏载效应, 在施工过程中需引起注意; 承压箱梁横向最大拉应力变化出现在箱梁横移到位, 架桥机中支腿支点附近, 此时架桥机中支腿荷载达到最大值; 整体而言, 承压箱梁混凝土应力未超限, 运、架施工工艺安全可靠, 并且架设效率高, 值得类似工程借鉴和推广 |
| Abstract: | A highway project in Ningbo attempts to adopt the technical scheme of “one girder-transport-vehicle transports box girder across the left and right decks and the bridge machine erects the 35m/800t asymmetric whole span box girder”. In view of being the first application of this technical scheme at home and abroad alike, this paper investigates the forced state about pressure bearing box girder during the erection by both experimental test and numerical simulation analysis. The results showed that the worst working condition during the erection is transporting the box girder to designed position. The junction of short flange and bottom of box girder web in mid-span section is the worst location for bearing load. Moreover, the change of the longitudinal tensile stress at the junction of short flange and bottom of pressure bearing box girder is generally larger than that at the long flange, for which the eccentric load effect should be paid attention to during the construction process. The change of the maximum transverse tension stress of the pressure bearing box girder appears when box girder is traversed to the designed position, where near the middle outrigger of bridge machine. At this time, the middle outrigger of bridge machine is bearing the largest load. Overall, during the construction process, the concrete stress of pressure bearing box girder has not exceeded the limited values. The results showed that the new transportation and erection construction technology is safe, reliable and efficient, which is worth referencing and popularizing for similar projects |
| 参考文献 /References: | [1].Bujňáková P, Strie?ka M. Development of precast concrete bridges during the last 50 years in Slovakia[J]. Procedia Engineering, 2017, 192:75-79. [2].王飞, 吕忠达, 徐爱敏, 等. 运梁车单车跨双幅非对称预制箱梁偏心运梁试验[J]. 桥梁建设, 2017, 47(6):66- 71. [3].Moon D Y, Sim J, Oh H. Practical crack control during the construction of precast segmental box girder bridges [J]. Computers and Structures, 2005, 83:2584-2593. [4].武凤远. 高速铁路、客运专线预应力混凝土简支箱梁分析试验研究[D]. 上海: 同济大学, 2009. [5].刘辉, 秦顺全. 高速铁路900t级常用跨度桥梁建造技术[J]. 铁路工程学报, 2009(2):60-63. [6].郑健. 中国高速铁路桥梁建设关键技术[J]. 中国工程科学, 2008, 10(7):18-27. [7].刘家锋. 我国铁路客运专线中小跨度简支箱梁架设方法综述[J]. 铁道标准设计, 2010(6):42-47. [8].吕忠达. 杭州湾跨海大桥关键技术研究与实施[J]. 土木工程学报, 2006, 39(6):78-82. [9].李友明, 刘乃生, 林原. 杭州湾跨海大桥滩涂区50m箱梁施工关键技术[J]. 桥梁建设, 2006(3):42-46. [10].吕忠达, 高志勇, 程德林, 等. 大型整体预制箱梁的运输架设[J]. 桥梁机械与施工技术, 2006(12):45-47. [11].刘乃生, 张权, 杨勇. 1500吨级整孔预制箱梁运输方案研究[J]. 筑路机械与施工机械化, 2009, 26(6):20-23. [12].赵剑发, 王毅, 谭国顺. 海上大型预应力混凝土箱梁整孔预制与架设技术[J]. 桥梁建设, 2006(3):37-41. [13].张军豪. 非对称大吨位预制箱梁分幅架设试验研究[D]. 郑州: 郑州大学, 2017. [14].Wang H L, Feng G Q, Qin S F. Hysteretic behavior of prestressed concrete bridge pier with fiber model[J/OL]. The Scientific World Journal, 2014, 2014:467350 [2017- 08-09]. http://dx.doi.org/10.1155/2014/467350. [15].张玲. 铁路箱梁运架施工受力分析[J]. 武汉理工大学学报(交通科学与工程版), 2012, 36(6):1317-1320. [16].张杰. 大跨预制箱梁分幅架设施工过程中花瓶形桥墩空间受力分析[J]. 中外公路, 2017, 37(4):156-161. |
| 备注/Memo: | 收稿日期: 2018?10?26. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/ 基金项目: 宁波市桥梁技术科技创新团队（2014B81003）. 第一作者: 蔡煜梁（1993－）, 男, 浙江湖州人, 在读硕士研究生, 主要研究方向: 桥梁工程. E-mail: 397054694@qq.com *通信作者: 吕忠达（1963－）http://journallg.nbu.edu.cn/ |
