聚乙烯醇/MXene复合材料发泡行为及压缩性能研究
PDF下载 (297)牛耀彬,赵宝艳,张 利.聚乙烯醇/MXene复合材料发泡行为及压缩性能研究[J].宁波大学学报(理工版),2023,36(4):25-32.DOI:10.20098/j.cnki.1001-5132.2023.0237
NIU Yaobin,ZHAO Baoyan,ZHANG Li.On foaming behavior and compressibility of polyvinyl alcohol/MXene composites[J].Journal of Ningbo University(Natural Science & Engineering Edition),2023,36(4):25-32.DOI:10.20098/j.cnki.1001-5132.2023.0237
| Title: | On foaming behavior and compressibility of polyvinyl alcohol/MXene composites |
| 作者: | 牛耀彬, 赵宝艳, 张 利 |
| Author(s): | NIU Yaobin, ZHAO Baoyan, ZHANG Li |
| 关键词: | 聚乙烯醇; 超临界二氧化碳; 泡孔形貌 |
| Keywords: | MXene; polyvinyl alcohol; supercritical carbon dioxide; cell morphology |
| 分类号: | TQ328.9 |
| DOI: | 10.20098/j.cnki.1001-5132.2023.0237 |
| 文献标识码: | A |
| 摘要: | 通过超临界二氧化碳(scCO2)发泡技术制备聚乙烯醇(PVA)/MXene复合发泡材料, 对MXene在复合材料中的均匀性进行表征, 探究MXene含量与饱和温度对泡孔形貌的影响以及MXene含量对发泡材料压缩性能的影响. 扫描电子显微镜与X射线能谱结果表明, MXene在聚合物中分布均匀, 且没有团聚现象发生. MXene在发泡过程中可作为异相成核点, 提高成核效率, 显著减小了孔径, 增加了孔密度. 添加1％MXene发泡材料与纯PVA发泡材料相比其泡孔密度提高了3个数量级, 压缩强度提高了10倍. |
| Abstract: | In this paper, polyvinyl alcohol (PVA)/MXene composite foams are prepared using supercritical carbon dioxide (scCO2) foaming technology. The uniformity of MXene in the composites is characterized. Also investigated are the influence of MXene content and saturation temperature on the morphology of the foams and the effect of MXene content on the foam compress properties. SEM and EDS results show that Mxene disperses uniformly in the polymer matrix and no obvious agglomeration occurs. Mxene can be used as heterogeneous nucleation agent in the foaming process to improve the nucleation efficiency, significantly reducing the pore size and increase the pore density. The cell density of the foamed material with 1％ MXene is three orders higher in magnitude than that of pure PVA foamed material, and the specific compressive strength is found to be 10 times higher. |
| 参考文献 /References: | [1] Ning H Z, Ma Z Y, Zhang Z H, et al. A novel multifunctional flame retardant MXene/nanosilica hybrid for poly(vinyl alcohol) with simultaneously improved mechanical properties[J]. New Journal of Chemistry, 2021, 45(9):4292-4302. [2] Oh S H, Kang S G, Kim E S, et al. Fabrication and characterization of hydrophilic poly(lactic-co-glycolic acid)/poly(vinyl alcohol) blend cell scaffolds by melt-molding particulate-leaching method[J]. Biomaterials, 2003, 24(22):4011-4021. [3] Wu C T, Luo Y X, Cuniberti G, et al. Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability[J]. Acta Biomaterialia, 2011, 7(6):2644-2650. [4] 吴志昂, 郑晓平, 龚莉雯, 等. 发泡工艺及超临界二氧化碳诱导结晶作用对聚碳酸酯发泡行为的影响[J]. 材料导报, 2020, 34(8):8200-8204. [5] Chi Y, Zhang G L, Xiang Y B, et al. Fabrication of a temperature-controlled-release herbicide using a nanocomposite[J]. ACS Sustainable Chemistry & Engineering, 2017, 5(6):4969-4975. [6] Faraji M, Mohammadzadeh-Aydisheh H. Facile and scalable preparation of highly porous polyvinyl chloride-multi walled carbon nanotubes-polyaniline composite film for solid-state flexible supercapacitor[J]. Composites Part B: Engineering, 2019, 168:432-441. [7] Fang Y W, Bao J B, Yan H K, et al. Preparation of open-cell foams from polymer blends by supercritical CO2 and their efficient oil-absorbing performance[J]. AIChE Journal, 2016, 62(12):4182-4185. [8] Jia Y B, Bai S B, Park C B, et al. Effect of boric acid on the foaming properties and cell structure of poly(vinyl alcohol) foam prepared by supercritical-CO2 thermoplastic extrusion foaming[J]. Industrial & Engineering Chemistry Research, 2017, 56(23):6655-6663. [9] 孙佳成. 聚乙烯醇发泡材料的制备及性能研究[D]. 宁波: 宁波大学, 2019. [10] Xiang A M, Yin D Y, He Y, et al. Multifunctional nucleating agents with simultaneous plasticizing, solubilizing, nucleating and their effect on polyvinyl alcohol foams[J]. The Journal of Supercritical Fluids, 2021, 170:105156. [11] Li D L, Zhang L, Xu J K, et al. Eco-friendly strategy to improve the processiblity and properties of poly(vinyl alcohol) foams based on a 3D hydrogen-bond network[J]. Industrial & Engineering Chemistry Research, 2020, 59(45):20011-20021. [12] Ghidiu M, Lukatskaya M R, Zhao M Q, et al. Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance[J]. Nature, 2014, 516(7529):78-81. [13] Liang X, Garsuch A, Nazar L F. Sulfur cathodes based on conductive MXene nanosheets for high-performance lithium-sulfur batteries[J]. Angewandte Chemie International Edition, 2015, 54(13):3907-3911. [14] Naguib M, Gogotsi Y. Synthesis of two-dimensional materials by selective extraction[J]. Accounts of Chemical Research, 2015, 48(1):128-135. [15] Naguib M, Kurtoglu M, Presser V, et al. Two-dimensional nanocrystals produced by exfoliation of Ti3AlC2[J]. Advanced Materials, 2011, 23(37):4248-4253. [16] Seh Z W, Fredrickson K D, Anasori B, et al. Two-dimensional molybdenum carbide (MXene) as an efficient electrocatalyst for hydrogen evolution[J]. ACS Energy Letters, 2016, 1(3):589-594. [17] Wang X F, Kajiyama S, Iinuma H, et al. Pseudocapacitance of MXene nanosheets for high-power sodium-ion hybrid capacitors[J]. Nature Communications, 2015, 6:6544. [18] Pan Y, Fu L, Zhou Q W, et al. Flammability, thermal stability and mechanical properties of polyvinyl alcohol nanocomposites reinforced with delaminated Ti3C2Tx (MXene)[J]. Polymer Composites, 2020, 41(1):210-218. [19] Xu H L, Yin X W, Li X L, et al. Lightweight Ti2CTx MXene/Poly(vinyl alcohol) composite foams for electromagnetic wave shielding with absorption-dominated feature[J]. ACS Applied Materials & Interfaces, 2019, 11(10):10198-10207. [20] Li Y, Yao Z, Chen Z H, et al. Numerical simulation of polypropylene foaming process assisted by carbon dioxide: Bubble growth dynamics and stability[J]. Chemical Engineering Science, 2011, 66(16):3656-3665. [21] Moniruzzaman M, Winey K I. Polymer nanocomposites containing carbon nanotubes[J]. Macromolecules, 2006, 39(16):5194-5205. [22] Otsuki Y, Kanai T. Numerical simulation of bubble growth in viscoelastic fluid with diffusion of dissolved foaming agent[J]. Polymer Engineering & Science, 2005, 45(9):1277-1287. [23] Paul D R, Robeson L M. Polymer nanotechnology: Nanocomposites[J]. Polymer, 2008, 49(15):3187-3204. [24] ASTM D792-20. Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement[S]. |
| 备注/Memo: | 收稿日期: 2023－02－23. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/基金项目: 国家自然科学基金（51875318）.第一作者: 牛耀彬（1998－）, 男, 山西忻州人, 在读硕士研究生, 主要研究方向: 高分子轻量化. E-mail: newyxz@126.com*通信作者: 张利（1979－）, 男, 浙江温州人, 博士/副教授, 主要研究方向: 高分子轻量化. E-mail: zhangli2@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
