浮压法压实斜轧钢球内部空洞的条件
PDF下载 (23222)束学道1,2,田端阳1,2,王 雨1,2,魏伊伦1,2,殷安民1,2,王 英1,2.浮压法压实斜轧钢球内部空洞的条件[J].宁波大学学报(理工版),2017,30(1):1-6.DOI:
SHU Xue-dao1,2,TIAN Duan-yang1,2,WANG Yu1,2,WEI Yi-lun1,2,YIN An-min1,2,WANG Ying1,2.Conditions of compacting inner void of helical-wedge rolling steel-balls by floating-pressure method[J].Journal of Ningbo University(Natural Science & Engineering Edition),2017,30(1):1-6.DOI:
| Title: | Conditions of compacting inner void of helical-wedge rolling steel-balls by floating-pressure method |
| 作者: | 束学道1, 2, 田端阳1, 2, 王 雨1, 2, 魏伊伦1, 2, 殷安民1, 2, 王 英1, 2 |
| Author(s): | SHU Xue-dao1, 2, TIAN Duan-yang1, 2, WANG Yu1, 2, WEI Yi-lun1, 2, YIN An-min1, 2, WANG Ying1, 2 |
| 关键词: | 斜轧钢球; 浮压法; 空洞; 压实难度 |
| Keywords: | helical-wedge rolling steel balls; floating-pressure method; void; the difficulty of compacting |
| 分类号: | TG376.2 |
| 文献标识码: | A |
| 摘要: | 钢球斜轧成形工艺中容易出现心部疏松、空洞等质量问题, 为能有效地消除钢球内部空洞, 实现钢球高质量生产, 提出了利用高压气体压实钢球内部空洞的新方法, 简称浮压法. 利用DEFORM-3D有限元软件研究了浮压法压实钢球内部空洞的影响因素以及各因素的影响程度.结果表明: 压实空洞的难度随空洞尺寸的增大而减小随空洞到球面距离的增大而增大随温度的升高而减小随气压增长速度的提高而减小;影响因素的主次顺序为: 钢球温度、空洞尺寸、空洞位置气压增长速度 |
| Abstract: | In the process of helical-wedge rolling of steel balls, some quality defects, such as core loose and core void, are easily noted in most cases. In order to effectively eliminate inner void and achieve high production quality of steel balls, a new method of using high-pressure gas to compact steel balls is put forward. The influence of different factors on compacting inner void of steel balls by floating-pressure method is investigated using the DEFORM-3D finite element software. Results show that the difficulty of compacting void decreases with the increase of the void size; whereas it increases as the distance widens between the void and the ball surface. It is also found that the difficulty decreases with the increase of balls’ temperature; and it also decreases with the increase of the growth rate of the gas pressure. The influence factors are in the order of the balls’ temperature, the void size, the void position, and the growth rate of gas pressure. The results provide theoretical guidance for improving the quality and non-defective rate of steel balls |
| 参考文献 /References: | [1] PATER Z, TOMCZAK J, BARTNICKI J, et al. Experimental and numerical analysis of helical-wedge rolling process for producing steel balls[J]. Int J Mach Tools Manuf, 2013, 67:1. [2] PATER Z. Multi-wedge cross rolling of balls[J]. J Iron steel Res Int, 2013, 20(10):46. [3] 雷建中, 梁华. 热轧轴承钢球心部孔洞分析实例[J]. 轴承, 2010(8):41-42. [4] 胡正寰, 华林. 零件轧制成形技术[M]. 北京: 化学工业出版社, 2010:51-73. [5] 曹强, 华林, 钱东升. 轴承钢球毛坯热斜轧成形过程的数值模拟[J]. 轴承, 2015(1):16-21. [6] 杜少杰, 任小中, 刘永庆. 影响斜轧钢球质量的因素分析[J]. 机械设计与制造, 2013(2):248-250. [7] 崔振山, 徐秉业, 任广升, 等. 大锻件内部空洞的锻合压下率[J]. 塑性工程学报, 2002, 9(3):6-8. [8] 崔振山, 任广升, 徐秉业, 等. 圆柱体内部空洞的热锻闭合条件[J]. 清华大学学报(自然科学版), 2003, 43(2): 227-229. [9] 张效迅. 大锻件锻造成形过程中内部空洞型缺陷演化规律的研究[D]. 上海: 上海交通大学, 2009. [10] 吴永强, 安红萍. 基于宏细观模型的疏松缺陷研究方法[J]. 太原科技大学学报, 2012, 33(5):375-378. [11] 刘倩, 黄放, 吴玉忠. 大型锻件心部空洞型缺陷控制的数值模拟研究[J]. 锻压技术, 2014, 39(2):132-136. [12] 位杰, 束学道, 柳传, 等. 工艺参数对闭开联合楔横轧轴件端部质量的影响[J]. 热加工工艺, 2016, 45(15): 140-144. |
| 备注/Memo: | 收稿日期: 2016?09?22. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/ 基金项目: 国家自然科学基金（51475247）; 浙江省科技计划项目（2016C31018）; 宁波市自然科学基金（2015A610099）. 第一作者: 束学道（1968－）, 男, 安徽舒城人, 教授, 主要研究方向: 塑性加工工艺. E-mail: shuxuedao@nbu.edu.com 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
