3D打印技术在严重骨盆髋臼骨折内固定手术中的应用
PDF下载 (362)黄迪超,张雁儒,李海洋,吴志军,李 明.3D打印技术在严重骨盆髋臼骨折内固定手术中的应用[J].宁波大学学报(理工版),2019,32(6):11-15.DOI:
HUANG Dichao,ZHANG Yanru,LI Haiyang,WU Zhijun,LI Ming.Application of internal fixation for severe pelvic acetabular fracture with 3D printing technique[J].Journal of Ningbo University(Natural Science & Engineering Edition),2019,32(6):11-15.DOI:
| Title: | Application of internal fixation for severe pelvic acetabular fracture with 3D printing technique |
| 作者: | 黄迪超, 张雁儒, 李海洋, 吴志军, 李 明 |
| Author(s): | HUANG Dichao, ZHANG Yanru, LI Haiyang, WU Zhijun, LI Ming |
| 关键词: | 3D打印; 骨盆骨折; 髋臼骨折; 手术 |
| Keywords: | 3D printing; pelvic fracture; fracture of acetabulum; operation |
| 分类号: | R687.1 |
| 文献标识码: | A |
| 摘要: | 通过采集严重骨盆髋臼骨折患者的薄层CT扫描数据, 在Mimics中进行图像编辑、三维重建及分析总结, 探讨3D打印技术在严重骨盆髋臼骨折内固定手术中的应用. 结果表明, 3D打印技术有利于术前进行手术设计、术前预弯钢板, 有利于判断畸形及术中在确定截骨部位、复位的关键标记以及判断复位质量. 3D打印技术具有快速性、高仿真性、高成功率及通用性意义, 具有推广价值. |
| Abstract: | The application of 3D printing in internal fixation of severe pelvic acetabular fracture was investigated in the current study. Thin-layer CT scan data of patients with severe pelvic acetabular fractures were collected and analyzed by image editing and three-dimensional reconstruction in Mimics. 3D printing is helpful for preoperative surgical design, prebending of plate prior to operation, and judge of deformity. The site of the osteotomy, the key marker of reset and the judge of reset quality could thus be determined intraoperatively. 3D printing has the advantages of rapidity, high simulation, high success rate and universality. |
| 参考文献 /References: | [1]., 董乐乐, 左强. 3D打印技术在创伤骨科中的临床应用[J]. 中国数字医学, 2015, 10(6):45-47. [2].McGurk M, Amis A A, Potamianos P. Rapid prototyping techniques for anatomical modelling in medicine[J]. Annals of the Royal College of Surgeons of England, 1997, 79(3):169-174. [3].Caffrey T, Wohlers T. Additive manufacturing state of the industry[J]. Manufacturing Engineering, 2016, 156(5):45- 52. [4].邱雪, 吴荷玉, 刘红, 等. 3D[J]. 当代护士: 综合版, 2016(1): 184-185. [5].Berg E E, Chebuhar C, Bell R M. Pelvic trauma imaging: A blinded comparison of computed tomography and roentgenograms[J]. Journal of Trauma, 1996, 41(6):994- 1007. [6].方文. X线平片和CT在诊断骨盆创伤中作用的比较[J].国外医学: 创伤与外科基本问题分册, 1997(3):61-65. [7].张国明, 周东生, 贺宇, 等. 3D打印技术在复杂髋臼骨折治疗中的应用[J]. 中华创伤骨科杂志, 2016, 18(4): 306-311. [8].练旭辉, 陈忠, 叶文钦. 螺旋CT三维及多平面重建在骨盆髋臼骨折中的临床应用[J]. 中国医学影像技术, 2005(5):105-107. [9].范磊, 王云华, 王伯尧. 3D打印个体化治疗方案在复杂肩胛骨骨折中的应用[J]. 生物骨科材料与临床研究, 2018, 15(1):38-41. [10].朱春冀, 雷大林, 刘应旭. 3D打印个体化模板在骨科手术中的应用[J]. 中国卫生产业, 2015, 259(32):139- 141. [11].王德伟, 赵英伟. 3D打印技术在骨盆髋臼骨折诊疗中应用进展[J]. 创伤外科杂志, 2018, 20(1):84-87. [12].Lalit M, Abhishek M, Gaurang A, et al. 3D printing in designing of anatomical posterior column plate[J]. Journal of Clinical Orthopaedics and Trauma, 2018(9): 151-156. [13].Chana-Rodríguez F, Ma?anes R P, Rojo-Manaute J, et al. 3D surgical printing and pre contoured plates for acetabular fractures[J]. Injury, 2016, 47(11):2507-2511, [14].范磊, 何斌, 王伯尧. 3D打印个体化治疗方案在骨盆髋臼骨折中的应用[J]. 生物骨科材料与临床研究, 2018, 15(2):54-57. [15].周可, 毕大卫. 3D打印技术在骨盆髋臼骨折诊治中的应用现状与存在问题[J]. 中医正骨, 2016, 28(11):74- 76. [16].胡学峰, 洪建明, 刘敏, 等. 快速成型技术在骨盆、髋臼骨折治疗中的应用研究[J], 江西医学院学报, 2007, 47(5):56-58. [17].Zhang S, Su W h, Luo Q, et al. Measurement of the “safe zone” and the “dangerous zone” for the screw placement on the quadrilateral surface in the treatment of pelvic and acetabularfractures with stoppa approach by computa- tional 3D technology[J]. BioMed Research International, 2014, 2014:386950-386955. [18].Yu A W, Duncan J M, Daurka J S, et al. A feasibility study into the use of three-dimensional printer modelling in acetabular fracture surgery[J]. Advances in Orthopedics, 2015, 2015:617046-617049. [19].赵飞, 李岩, 毕龙, 等. 3D打印骨折模型辅助治疗复杂骨盆髋臼骨折的长期随访研究[J]. 中华创伤杂志, 2016, 32(11):967-973. |
| 备注/Memo: | 收稿日期: 2019?07?04. 宁波大学学报（理工版）网址: http://journallg.nbu.edu.cn/ 基金项目: 宁波大学医学院院校联合基金（浙江省病理生理学技术研究重点实验室开放基金）（201903）. 第一作者: 黄迪超（1990－）, 男, 浙江宁波人, 博士/住院医师, 主要研究方向: 骨科相关解剖及生物力学. E-mail: hsdichaohuang@163.com *通信作者: 李明（1971－）, 男, 山东潍坊人, 硕士/主任医师, 主要研究方向: 创伤骨科. E-mail: angells6@163.com 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
