超声共振法测定圆柱体材料弹性常数的影响因素分析
PDF下载 (260)丁军磊,吴景慧,吴 丹,马廷锋,王 骥.超声共振法测定圆柱体材料弹性常数的影响因素分析[J].宁波大学学报(理工版),2020,33(6):53-58.DOI:
DING Junlei,WU Jinghui,WU Dan,MA Tingfeng,WANG Ji.The influence factors for measurements of elastic constants of isotropic steel cylinders by resonant ultrasound spectroscopy[J].Journal of Ningbo University(Natural Science & Engineering Edition),2020,33(6):53-58.DOI:
| Title: | The influence factors for measurements of elastic constants of isotropic steel cylinders by resonant ultrasound spectroscopy |
| 作者: | 丁军磊, 吴景慧, 吴 丹, 马廷锋, 王 骥 |
| Author(s): | DING Junlei, WU Jinghui, WU Dan, MA Tingfeng, WANG Ji |
| 关键词: | 超声共振谱分析法; 圆柱体; 弹性常数; 超声共振法; 稳定性; 分散性 |
| Keywords: | resonant ultrasound spectroscopy; cylinder; elastic constants; ultrasonic resonance method; stability; distribution |
| 分类号: | TN912 |
| 文献标识码: | A |
| 摘要: | 为明确超声共振频谱分析法(RUS)测定圆柱体试样弹性常数的影响因素, 由此针对各向同性圆柱体开展实验, 观察圆柱体试样测量结果的分散性和稳定性, 且主要研究横纵比和有效模态数量对测量结果的影响, 并与拉伸试验的结果进行比较. 以测量结果标准差、变异系数和95%置信度下均值的区间估计3个指标来衡量结果的稳定性和分散性, 且从模态简并角度对实验结果进行分析. 最终结果表明, 当超声共振频谱分析法的有效模态数量在17左右、试样横纵比接近1时, 测量结果的稳定性和分散性较小. |
| Abstract: | Resonant ultrasound spectroscopy (RUS) is an efficient and accurate method to determine elastic constants of solids, but the results are affected by sample sizes and shapes. In order to study the distribution and stability of measurement data with cylindrical samples, experiments with isotropic cylinders of different aspect ratios and numbers of effective modes are conducted. The stability and distribution of measured results are examined with the standard deviation, the coefficient of variation and the boundaries of 95% confidence interval for the mean value. The results are further analyzed with the consideration of the degeneration of vibration modes and compared with those from tensile tests. The results show that the stability and distribution of measurements are small when the number of effective vibration modes is about 17 and the aspect ratio of samples is close to 1. |
| 参考文献 /References: | [1] Radovic M, Lara-Curzio E, Riester L. Comparison of different experimental techniques for determination of elastic properties of solids[J]. Materials Science & Engineering A, 2004, 368(1/2):56-70. [2] 王振. 基于超声共振频谱法的各向异性晶体材料的弹性常数测定[D]. 宁波: 宁波大学, 2013. [3] Maynard J D. Resonant ultrasound spectroscopy[C]// Medical Imaging ’98. Proc SPIE 3341, Medical Imaging 1998: Ultrasonic Transducer Engineering, San Diego, CA, USA, 1998:132-142. [4] Ren F, Case E D, Sootsman J R, et al. The high-temperature elastic moduli of polycrystalline PbTe measured by resonant ultrasound spectroscopy[J]. Acta Materialia, 2008, 56(20):5954-5963. [5] 蒋佳霖, 马廷锋, 王振,等. 超声共振弹性常数测定技术的影响因素分析[C]//2013中国西部声学学术交流会论文集(上). 敦煌, 2013:149-152. [6] Migliori A, Sarrao J L, Visscher W M, et al. Resonant ultrasound spectroscopic techniques for measurement of the elastic moduli of solids[J]. Physica B: Condensed Matter, 1993, 183(1/2):1-24. [7] Migliori A, Sarrao J L, Visscher W M, et al. Implementation of a modern resonant ultrasound spectroscopy system for the measurement of the elastic moduli of small solid specimens[J]. Review of Scientific Instruments, 2005, 76(12):121301. [8] Zadler B J, Scales J A, Smith M L. Resonant ultrasound spectroscopy: Theory and application[J]. Geophysical Journal International, 2004, 156(1):154-169. [9] Ohno I. Free vibration of a rectangular parallelepiped crystal and its application to determination of elastic constants of orthorhombic crystals[J]. Journal of Physics of the Earth, 1976, 24(4):355-379 |
| 备注/Memo: | 收稿日期:2018-12-02.宁波大学学报（理工版）网址:http://journallg.nbu.edu.cn/ 基金项目:国家自然科学基金（11672142）;浙江省大学生科技创新活动计划暨新苗人才计划（2015R405022）. 第一作者:丁军磊（1995－）,男,浙江宁波人,硕士,主要研究方向:压电声波谐振器.E-mail:ding.junlei@qq.com *通信作者:王骥（1962－）,男,甘肃徽县人,教授,主要研究方向:压电声波谐振器.E-mail:wangji@nbu.edu.cn 宁波大学学报（理工版）网址：http://journallg.nbu.edu.cn/ |
